Click on the image to view the original image
High quality Motion sensor microwave LED tube t8 led tube 1.2m, aluminum frame tube lights, led tubes lighting
T8 LED Tube Specs &features
| Product type | T8 LED tube |
| Material | Aluminum alloy +PC |
| Light source | SMD2835 LED chip |
| degradation rate | 25000h≤30% |
| Color rendering | Ra≥80 |
| Power factor | PF≥0.9 |
| Beam angle | ≥180° |
| Rated life | 50000h |
| Color temp | 2700K-7000K |
| Working temp | -20~+40°C |
| Input wattage | AC85-265V |
| IP code | IP33 |
| Lamp efficiency | 110lm/w |
| Sensor function | Optional |
| Brand | LRKJ & Customized& Netural packing |
| Warranty | 3 years |
| Certificate | CE, ROHS, FCC, EMC, LVD,TUV TISI PSE Compliance |
| Application | office, supermarket, hotel, factory, indoor lighting, etc. |
| T8 LED Tube Feature | * Small volume and easy to set |
| * Current driver with IC that make sure Long life-span, small light decline rate. | |
| * SMD2835 led chip with good light quality and aluminum alloy body for good heat dissipation | |
| * Beautiful appearance, High brightness output. | |
| * 180 degree special wide bean angles design | |
| * Green Product, No ultraviolet and infrared radiation | |
| * Special circuit design, each LED work separately, avoiding the single broken LED influencing effect | |
| * Prompt order procedure and timely delivery | |
| * Excellent customer service and technical support |
T8 LED Tube photos
T8 led tube serise
| Model | T8 led tube 9w | T8 led tube 13w | T8 led tube 18w | T8 led tube 24w |
| Length | 600mm/0.6m/2ft | 900mm/0.9m/3ft | 1200mm/1.2m/4ft | 1500mm/1.5m/5ft |
| Lumen | 900-990lm | 1300-1430lm | 1800-1980lm | 2400-2640lm |
| Voltage | AC 85-265V 50-60 Hz | |||
| Led qty | 60pcs | 72pcs | 120pcs | 150pcs |
| Angle | 180degree | |||
| Color Temp | Warm white(3000-3500K)/Netural white(4000-4500K) /Cool white(6000-6500K) | |||
| PF | 95% | 95% | 95% | 95% |
| Packing | 25pcs/ctn 660*230*230mm | 25pcs/ctn 960*230*230mm | 25pcs/ctn 1260*230*230mm | 25pcs/ctn 1560*230*230mm |
T8 Led Tube Color temp difference
T8 Led Tube Installation
Precaution:Please switch off power before doing any works.
Step 1 Remove the trational fluorescent tube from the lighting fixture
Step 2 Take out the inductor ballast or electronic ballast from the lighting fixture.
Step 3 2 situation need attention as follow: Inductive Ballast and electronic ballast.
T8 Led Tube shipping packing
| LR600-T8-9W-A | 660*220*230mm (7kg) 25pcs/ctn |
| LR900-T8-13W-A | 960*220*230mm (9kg) 25pcs/ctn |
| LR1200-T8-18W-A | 1260*220*230mm (12kg) 25pcs/ctn |
| LR1500-T8-24W-A | 1560*220*230mm (15kg) 25pcs/ctn |
T8 LED tube shipping
| QTys / Container | 600mm led tube | 900mm led tube | 1200mm led tube | 1500mm led tube |
| 20FT | 860cns /21500pcs | 560ctns/14000pcs | 430ctns/10750pcs | 325ctns/8125pcs |
| 40FT | 1860ctns/46500pcs | 1200ctns/30000pcs | 940ctns/23500pcs | 700ctns/17500pcs |
| 40FTHQ | 2180ctns/54500pcs | 1420ctns/35500pcs | 1090ctns/27250pcs | 820ctns/20500pcs |
Shipping advice: By sea, by express or by air.
Big qty is advised by boat which cost little , while it will take abt 25-50days that depends different areas.
Sample is advised by express which is quick and convenient.
Small qty is advised by air,price will be higher, but quick and can be installed within few days.
T8 Led Tube Quality Control
Every order is checked throughout the production process by our QC department.
1.100% led tube will be tested and keep lighting for 24 hours to test quality reliability.
2. Test tube temperature after 24 hours’ lighting.
3. Test the lamps to see if it still works well after it is cool .
Each lamp should pass all these QC procedures before shipping to customer.
T8 Led Tube CE ROHS FCC Patent certification
T8 Led Tube Application
Warranty Policy
1. 2 years waranty time, repalce any models that broken due to poor quality within 2 years, which will sent with your following order tegether to save shipping cost.
2. Good price repair parts will be offered after warranty time.
3. Tracking number is available on each light which can offer matched repaired parts.
Trade Term
1. Payment: T/T, Western Union & Paypal , L/C
30% deposit, 70% be paid before delivery. 100% paid for sample or small amout.
2. Lead time:3-5 days for sample, 7-10 working day for batch order
3. OEM ODM available for customer who want built his own brand.
4. Shipping: Shenzhen or shanghai port, Mainland China
T8 led tube company info
Anhui Lanrui Electronics Technology Co., Ltd. is located in Province AnHui,founded branch in Guangzhou, which deal with led lights since 2010. Lanrui electronics always believe that good quality products and services are the basic to move far. CE ROHS FCC TUV TISI PSE approved. Products have command a ready market in many countries and regions, such as Europe, America, Japan, Middle East, and Southeast Asia etc..
Products include led tubes,bulbs, led panel light, downlight, led street light, high bay light, led flood light, solar system etc..
Hope we can start cooperation from a trial sample order!
FAQ
1. What's the Led chip type?
A: High bright SMD2835 or COB led chip for indoor lighting; Bridgelux/Epistar/Cree led chip for highbay, street light and other outdoor lighting.
2. What kind of your company?
A: Lanrui is A led light manufactuer which specilized in led fields since 2010.
3. How to pay for sample and normal order?
A: Paypal for sample order and TT for normal order.
100% prepaid for sample.
30% deposit, 70% balanced for TT normal order.
4. Delivery time for sample and normal order?
A: 3-5days for sample, 7-15days for normal order.
Other similar led tube
Sofia is here for any questions. SKYPE: lrkj-sales804