Click on the image to view the original image
3CH 3x4A 144W 4 Channel 4x4A 384W Digital Display DMX Decoder DMX512 LED Controller Driver DC 12~24V for RGB /RGBW LED Strip
Technical Parameters
1: RGB/RGBW DMX512 decoder;
2: It can receive the international DMX - 512 standard digital control signals and converted into PWM controller signal to control the LED.
3: It can be controlled by the DMX Console;
4: It can show synchronous effect with controller effect;
5: This decoder adopt the digital tube to show the address number, no longer need to go complex calculation of the address.
6: It connect with RJ45 port.
Digital display specification:
Adopt the 4 numbers digital tube, and with three button to setting the address code.
Each Decoder need 3 address numbers(RGB); need 4 address number(RGBW).
The first number on the digital tube is the Function symbol, it has A, H, or S letter , and the last three number is to show the Arabic date from 001-512.
1.When the first letter shows "A", means that this decoder is under the DMX512 Signal control status, at this time connect the decoder to the DMX console with RJ45 cable, it can be controlled by the DMX console.
RGB Addressing:#1 as "A001" , #2 will be "A004", #3 will be "A(001+(N-1)*3)....
RGBW Addressing:#1 as "A001" , #2 will be "A005", #3 will be "A(001+(N-1)*4)....
If all the decoder's address are the same , then these decoders will changing the same.
2.When the first letter shows "H", means this decoder will be worked with built-in programs. the build-in programs are as below:
1) When the first letter shows "S", you can select the number to adjust the built-in dynamic modes speed, Only mode H-08 and H-09 are available , 11 levels speed.
Key function specification:
There are three buttons (Button 1: SET ,Button 2:- Button 3:+)on the decoder, functions of them are as below:
SET:Mode switch button,press and hold this button for 2 seconds to switch it from A to H, Short Press to switch it from H to S.
+: number increase button,increase the number from 1 to 512, press and hold the button can make the number change fast.
- :number decrease button, decrease the number, press and hold the button can make the number change fast.
Q1.Can I have a sample order for led light?
A:Yes, we welcome sample order to test and check quality.Mixed samples are acceptable.
Q2.What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity.
Q3.Do you have any MOQ limit for led light order?
A:Low MOQ,1pc for sample checking is available
Q4.How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT.It usually takes 3-5 days to arrive.Airline and sea shipping also optional.
Q5.How to proceed an order for led light?
A:Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6.Is it OK to print my logo on led light product?
A:Yes.Please inform us formally before our production and confirm the design firstly based on our sample.
Q7:Do you offer guarantee for the products?
A:Yes,we offer 2-5 years warranty to our products.
Q8:How to deal with the faulty?
A: Firstly,Our products are produced in strict quality control system and the defective rate will be less than 0.2%.Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.