Super Bright SMD LED Chip 0603 Blue Color
Fetures:
- Package in 8mmtape on 7” diameter reel lCompatible with automatic placement equipment.
- Compatible with infrared and vapor phase reflow solder process.
- High intensity and reliability.
- High quality, Low power requirement and low cost.
- The product itself will remain within RoHS compliant version.
- Pb-free.
- ESD 1000V(HBM).
Device Selection Guide:
Chip material | Emitted color | Resin Color |
AlGaInP | Blue | Water Clear |
Precautions For Use:
- Over–Current–Proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change.(Burn out will happen)
- Storage
1. Do not open moisture proof bag before the products are ready to use.
2. The LEDs should be used within a year. Before opening the package, the LEDs should be kept at 25℃ or less and 80%RH or less.
3. After opening the package, the LEDs should be kept at 60%RH or less.
4. The LEDs should be used within 168 hours (7 days) a after opening the package.
5. If the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours
- Soldering Condition
1. Pb-free solder temperature profile
2. Reflow soldering should not be done more than two times.
3. When soldering, do not put stress on the LEDs during heating.
4. After soldering, do not warp the circuit board.
- Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
- Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
- Office Electronic Equipment: money counting machine, office phone set, copying mechine...
- Household Appliances: refrigerator, air conditioner, induction cooker, microwave ovens...
- Instruments: clinical thermometer, wire tester, digital watches, electronic weight scale...
- Medical Devices: sphygmomanometer...
- Sports Equipment: running machine...
- Industrial Control Equipment: remote control, punched-card machine...
- Information Terminal Display: POS...
- Security Products: elevator controller, electronic indicator...
Q1:Are you a factory or trading company?
A1:We are a factory with 20 years experience in this field .And we provide OEM&ODM services.
Q2:Can I get a sample?
A2: Yes, we welcome sample order to test and check quality.Mixed samples are acceptable.
Q3: How do you ship the goods and how long does it take arrive?
A3: We usually ship by UPS, DHL, EMS, FEDEX or TNT. It usually takes 3-7 days.
(The freight for sample delivery is at receiver's side;For saving the cost, we recommend the way of prepaid instead of collect.)
Q4:Where is your location?
A4: Our factory is in Yixing(Wuxi) city,Jiangsu Province,it takes 3 hours far away from shanghai by car.
Q5.What is the delivery time?
A5:Normally it takes 20-45days after receiving your payment,but it could be negotiated based on your order quantity and our production schedule.