Click on the image to view the original image
1. This strip is DMX 512 RGB led digital strips that different with normal SPI led pixel strips. DMX512 led strips protocl is DMX512 that signal is parallel not series.
2. Its advantage is parallel DMX512 signal could avoid RGB LEDs color influenced by the failure of one light in serial connection.
3. Entire strip has 10 pixels ( 30 channels), 60 pcs RGB leds in a meter with 12mm width pcb board.
4. Communication between DMX512 led digital strips are synchronized perfectly under support of Artnet / DMX512 led controllers.
5. DMX512 RGB led pixel tape strips DMX address need to be set via DMX address coder / controller.
6. Vivid lighting performance operated by Madrix software, Artnet / DMX512 led controllers.
7. 10 pixels 60 leds DMX512 RGB led strip is flexible , bright, durable and easy for installation.
For bare board strip, you can use the 3M adhensive tape on back; For waterproof silicone tube strip, there shipped with flexible silicon brackets and screws, the brackets fit over the waterproof sheath, it would be used to mount the led strips very well.
8. Widely used in entertainment, stage, live performance, Disco Club and TV Show, etc
Light source | Epistar SMD5050 RGB LED |
Beam angle | 140 deg |
Operating voltage | DC24V |
Consumption watts | 19±W |
Protocol | DMX512 RGB UCS512 C4 |
Entire piece quantity | 10 pixels, 60 RGB leds |
PCB board thickness | 12mm wide, 0.3mm thickness |
Pixel Pitch | 100mm |
What's the difference between SK6812RGBW LED Tape, Analog RGBW LED tape and DMX RGBW LED Tape
SK6812 RGBW LED strip is intelligent LED that has PWM driver assembled which LEDs could play full color changing individually.
Analog RGBW LED tape is entire strip play same color changing.
DMX RGBW led strip is DMX512 signal that controlled by DMX controller
What's the relationship between DMX RGBW LED strip and DMX RGB LED Strip
I'm wondering if you could make customsized LED tapes
Definitely sure. We recommend to discuss details via emails.
Could we get free sample
If you required were normal LED strips, FREE sample, but transporation cost need to be collected.
What's the delivery date
3-5 days for normal led products, OEM led prodcuts are 10-15 days.
What's the accessory will be needed for this led pixel strips
1) Controller, like Arduino, Raspberry pi, DMX,Artnet,SD card controllers
2) Transformers, depending the input voltage of the pixel led strip to choose
3) Cables, normally are 22AWG - 18AWG
Do you have other DMX512 led tapes
We do produce ! like 12v DMX512 RGB RGBW LED strips . Addressable RGB RGBW pixel led tapes from 32 pixel to 60 pixels. Welcome to give us an email.
FAQs
←