Click on the image to view the original image
1.The conventional fire alarm system control panel general description:
-- The AW-CFP2166is atranditional type of fire alarm control paneldesigned based on EN54 part 2&4 standard.
--It is steady and widely used to work with other brands fire alarm detectors/sensors like manual call point/break glass, smoke detector, heat detector, combined smoke and heat detector, strobe with sounder, flash light, fire bell, etc.
-- It is modularized design, the panel can extend from 1 zone to 32 zones easily.
2.Details of the conventional fire alarm system control panel :
1) The outlook of the conventional fire alarm control panel:
2).The characteristics of the conventional fire alarm system control panels:
Model | AW-CFP2166 , 1 to 32 zones |
Design principle | The series conventional fire alarm panel is designed based on EN54 part 2&4 standard. |
control mode | 2 level control mode by a lock |
power supply output | 27VDC |
signal output | Has FIRE PROTECTION, FIRE ROUTING and FAULT signal output; the output can be configured to dry relay type or wet sources type. |
sounders output | Has 2 channel general sounders output. |
Special function |
|
industrial and civil buildings factories, hospitals, restaurants, hotels, schools, business buildings, government buildings,etc. | |
Advantage | Efficient feedback, steady and easy to work with other brands fire products,Humanization setting, Economic, User friendly,etc. |
3. Main technical parameters of AW-CFP2166 fire alarm control panel:
ITEM | 1 Zone panel | 2 Zone panel | 4-8 Zone panel | 4-32 Zonepanel |
Model No. | AW-CFP2166-01 | AW-CFP2166-02 | AW-CFP2166-04-16 | AW-CFP2166-04-32 |
Power specification |
| |||
Mains supply voltage | 110VAC or 240VAC | |||
Internal power supply | 27.2VDC | |||
Total output current limited | 500mA @ 240VAC | 500mA @ 240VAC | 3A @ 240VAC | 3A @ 240VAC |
Main supply monitor for fault | Yes | |||
Battery protection for low voltage | Yes | |||
Batteries (default configuration) | 12V2AH*2 | |||
Detector circuit specification |
| |||
Number of circuit | 1 | 2 | 4-16 | 4-32 |
Maximum number of smoke/heat detectors per zone | 20 (based on a total detector current of 2mA, each detector consuming 100μA).Note: if End of Line Monitor Unit is fitted, for correct operation maxmum voltage drop must not exceed 12 volts. | |||
Maximum number of manual call points per zone | No limit | |||
Sounder circuit specification |
| |||
Number of general circuits | 2 | |||
End of line resistor value | 6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,gold) | |||
Line fault monitor for open circuit | Yes | |||
Line fault monitor for short circuit | Yes | |||
Outputs fused AT | 400mA | |||
Maximum number of bells @ 20mA of each sounder output | 20 | |||
Fuses |
| |||
27VDC fuse | 3A F 20mm | |||
Fire and fault output |
| |||
Output type | Dry relay output :NC and NO relay; wet source output | |||
Maximum current | 100mA | |||
Size and weight |
|
| ||
Dimensions(mm) | 272*200*70mm | 320*231*90mm | 395X502X124 | 362X565X124 |
Weight (without batteries) | 4kg | 5kg | 7kg | 8kg |
Weight (with batteries) | 5.8kg | 6.8kg | 9.6kg | 12.5kg |
4. System diagram of the conventional fire alarm panel
5.The Whole Fire Alarm Control Panel System
The conventional fire alarm control system 2166 series matchedthe below detectors and accessories:
1) AW-CSD311:conventional photoelectric smoke detector
2) AW-CTD805: conventional fixed temperature heat detector
3) AW-CSH202:conventional smoke and heat combind detector
4) AW-CMC2166-1, AW-CMC2166-5: conventional manual call point/break glass
5) AW-CSS2166-2: conventional hooter/horn
6) AW-CBL2166-A: conventional fire bell
7) AW-CBL2166: conventional flash light
fire alarm system control panel
fire alarm control systems,fire alarm system, conventional fire alarm panel, alarm system control panel, conventional fire alarm panel, alarm panelleri, fire fighting equipment , fire alarm equipment, fire detection equipment,fire fighting equipment company, fire safety equipment company, fire protection equipment company,alarm control, alarm system control, alarm system control, fire alarm control, fire control panel, fire protection and control, active fire control