Click on the image to view the original image
Asenware conventional alarm system fire break glass
Specification of Asenware conventional alarm system fire break glass
Asenware conventional alarm system fire break glass technical parameters | |
| Executive standard | GB19880-250 |
| Operating voltage | 24V (pulse modulation) |
| Operating current | <300µA |
| Weight | 162g |
| Wiring method | nonpolar two-bus system |
| Operating enviroment | Indoor |
| temperature | -10°C~+50°C |
| Relative humidity | ≤95% |
Show Of Asenware conventional alarm system fire break glass
Asenware conventional alarm system fire break glass features:
1.Executive standard: GB19880-2005
2.Operating voltage: 24V (pulse modulation)
3.Operating current: <300uA (in the monitoring status); <2mA (in the action status)
4.Output contact: Normally open contact; capacity: 0.1A/30VDC
5. Weight: About 120g
6. Wiring method: nonpolar two-bus system (L1, L2)
7. Operating environment: Indoor, temperature: -10°C~+50°C; relative humidity: ≤95% (40°C±2°C,
without condensation)
8. Coding method: It can realize online coding with the help of a coder and without the necessity of
disassembling the bus (however, the equipment must be powered off). Address codes 1 to 324
are available for selection.
9. Telephone jack: Two-wire fire telephone jack (equipped with a standard 6.3 single-track audio connector).
10.Starting part: A plastic pressing sheet that may be used repeatedly. It can be manually reset with a special
tool after being pressed.
11. Starting mode: Press the pressing sheet manually.
12. Indicator: The red ALARM indicator will blink in the inspection status or remain lit in the alarm status;
the PHONE indicator will blink when a fire telephone loop is connected, otherwise it will be out.
Matched host machine: fire alarm control panel (such as AW-AFP2188)