Click on the image to view the original image
| Light Sources | 7pieces 12W RGBWA+UV 6-in-1 LED |
| 7 pieces 10W RGBWA 5-in-1 LED | |
| 7 pieces 8W RGBW 4-in-1 LED | |
| Beam Angle | 25° |
| Power Consumption | 50w/70w/120 w |
| Channel | 8/9/10 Channel |
| Control Modes | |
| Protection Rating | IP20 |
| Dimension | 16.5X16.5X7 cm |
| NW | 1.5 kgs |
>>>Click "Send" for us,your inquiries and
visits are warmly welcome!
| There are 6 normal steps for QC control process: |
| Step 1: all materials passed 100% IQC inspect |
| Before send materials to workshop and start to produce, our IQC technicians will inspect them.And only the materials are approved to send to workshop if they are qualified. |
| Step 2: at least 48 hours aging test before packing |
| All unit lights will be 100% QC inspect and takes around 48- 72 hours aging test |
| Step 3: hang testing |
| Each batch production we will select certain percent to do hang or rotating test. |
| Step 4 : Environment high temperature testing |
| we did two parts test for high temperature testing : |
| A: testing during the product still in R & D |
| B: testing for each batch production |
| Usually we test the temperature reach to around 45℃. |
| Step 5 : vibration test--simulating transit environment |
| each batch production we will select certain percent to test to make sure the goods is safe in transport. |
>>>Click "Send" for us,your inquiries and
visits are warmly welcome!
>>>Click "Send" for us,your inquiries and
visits are warmly welcome!
Contact us
Highly Recommended