Light Sources | Yodn 380w/440W lamp |
Zoom range | 2.2-50degree |
Max Power Consumption | 100w/200w |
2Channel mode | Standard mode(30CH),Simple mode(26CH) |
Control Modes | DMX 512, Auto, Master-slave, Sound |
Power consumption | 500W |
Pan | 540° (16bit) Electric correction |
Tilt | 270° (16bit) Electric correction |
warranty | 2years |
Color 7 & Color 7 zoom &Prism zoom &CMY | support |
Color wheel | 13color+white |
Fixed gobo wheel | 14gobo+gobo Jitter |
Rotating gobo | 7gobo |
Effects gobo | 3gobo+gobo Jitter |
Prism 1 | 8-facet prism |
Prism 2 | 16-facet prism |
Frost &Focus | Support |
NW | 23 kgs |
>>>Click "Send" for us,your inquiries and
visits are warmly welcome!
There are 6 normal steps for QC control process: |
Step 1: all materials passed 100% IQC inspect |
Before send materials to workshop and start to produce, our IQC technicians will inspect them.And only the materials are approved to send to workshop if they are qualified. |
Step 2: at least 48 hours aging test before packing |
All unit lights will be 100% QC inspect and takes around 48- 72 hours aging test |
Step 3: hang testing |
Each batch production we will select certain percent to do hang or rotating test. |
Step 4 : Environment high temperature testing |
we did two parts test for high temperature testing : |
A: testing during the product still in R & D |
B: testing for each batch production |
Usually we test the temperature reach to around 45℃. |
Step 5 : vibration test--simulating transit environment |
each batch production we will select certain percent to test to make sure the goods is safe in transport. |
Step 6: waterproof testing (only for IP65 lights) |
all waterproof lights we will do waterproof test to see can it be work fine under rain. |
>>>Click "Send" for us,your inquiries and
visits are warmly welcome!
Contact us
Highly Recommended
Recommended