Click on the image to view the original image
Specification
| Light Sources | 7x60w RGBW 4-in-1 led |
| Beam Angle | 3-45° |
| Power Consumption | 500w |
| Warranty | 2years |
| Control Modes |
DMX512,Master-Slaver,Auto-Run,Sound,Music |
| Display | 180 Reversible 1.8-inch TFT color display |
| DMX Channel | 21/23/35/42/49/51/56 Channel |
| Pan/Tilt | 540°/270°,270° |
| Pan/Tilt resolution | 8/16 bit |
| Dimension |
37.6x28x42cm |
| NW | 16.5kgs |
>>>Click "Send" for us,your inquiries and
visits are warmly welcome!
R&D+quality control
| There are 6 normal steps for QC control process: |
| Step 1: all materials passed 100% IQC inspect |
| Before send materials to workshop and start to produce, our IQC technicians will inspect them.And only the materials are approved to send to workshop if they are qualified. |
| Step 2: at least 48 hours aging test before packing |
| All unit lights will be 100% QC inspect and takes around 48- 72 hours aging test |
| Step 3: hang testing |
| Each batch production we will select certain percent to do hang or rotating test. |
| Step 4 : Environment high temperature testing |
| we did two parts test for high temperature testing : |
| A: testing during the product still in R & D |
| B: testing for each batch production |
| Usually we test the temperature reach to around 45℃. |
| Step 5 : vibration test--simulating transit environment |
| each batch production we will select certain percent to test to make sure the goods is safe in transport. |
>>>Click "Send" for us,your inquiries and
visits are warmly welcome!
Client feedback
Company Profile
Contact us
Highly Recommended