Click on the image to view the original image
Product Summary![]()
The photocontroller BN-PC202 series is applicable to control the street lighting, garden lighting, passage lighting and doorway lighting automatically in accordance with the ambient natural lighting level. This product is designed on the basis of thermal - bimetallic structure that provides time delay over 30 seconds to avoid mis-operation due to spotlight or lightning during the night time. A temperature compensation system provides consistent performance regardless to the ambient temperature..
Installation & Operational Instructions
Disconnect power; wire the color coded receptacle according to the diagram below. Push the photocontroller on and twist it clockwise to lock it into the receptacle.
Install the photocontroller with the Photocell facing the NORTH direction as indicated on the top of the photocontroller. Adjust the receptacle position if necessary
Initial Testing
It is normal for the SWITCH to take several minutes to turn off when first installed. To test “turn on” during daytime, cover its eye with sliding the metal strip mounted. Do not cover with finger because light traveling through fingers may be great enough to keep the switch open. Test will take approximately 2 minutes.
Initial Testing
| Model No. | BN-PC202A | BN-PC202B | BN-PC202C | BN-PC202D |
| Nominal Rated Voltage | 110-120VAC | 220-240VAC | 208VAC | 277VAC |
| Applicable Volt Range Nominal | +/-10% | |||
| Rated Frequency | 50/60Hz | |||
| Rated Loading | 1800W Tungsten, 1000VA Ballast | |||
| Power Consumption | 1.5VA (Average) | |||
| Standard Operate Level | 10~20Lx On, 30~60Lx Off | |||
| Photocell Size**** | 0.5” with heat sink (Standard) / 1” (Deluxe) | |||
| Ambient Temperature | -40℃ ~ +70℃ | |||
| Related Humidity | 0.99 | |||
| Overall Dimensions (mm) Null: | 74dia.x 50 (Clear) / M: 74dia.x 60 / H: 84dia.x 65 ** | |||
| Enclosure Color (M/H) | Gray | Maroon | Blue or Client Request | **Clear |
| Enclosure (Null) | Available | |||
| Weight Approx. | 62~90grs | |||
| Materials: | Enclosure & Lens – High impact UV stabilized Polycarbonate | |||
| Base | – High impact Polybutylene terephthalate | |||
| Photocell – | Cadmium Sulfide 0.5” with heat sink (Standard) / 1” (Deluxe) | |||