Click on the image to view the original image
Product Description
Product Summary![]()
All the BN-PC200 series photocontrol receptacles were designed for the lanterns those without an ANSI C136.10-1996 receptacle equipped to fit a twist-lock photocontrol...
Installation & Operational Instructions
Disconnect power; wire the receptacle according to the diagram in right hand. An arrow indicating NORTH on the top of the receptacle is used to assist correct direction. Push the photocontroller on and twist it clockwise to lock it into the receptacle.
Install the photocontroller with the Photocell facing the NORTH direction as indicated on the top of the photocontroller.
Adjust the receptacle position if necessary.
Initial Testing
For other mounting methods, ask for the drilling plan to ensure the proper securement..
Initial Testing
| Model | BN-PC200X | BN-PC200 | BN-PC200Z |
| Applicable volt range | 0~480VAC | ||
| Suggested loading | 50/60Hz | ||
| Ambient Temperature | AWG#18:10Amp;AWG#14:15Amp | ||
| Rated Humidity | _40℃ ~ +70℃ | ||
| Overall Dimensions(mm) | 65Diax38.5 | 65Diax65 | |
| Accessory:Back/front cover Zinc Alloy Lock Nut Nounting Plate/Base | _ | Yes | Yes |
| _ | Yes | Yes | |
| _ | Yes 30*(70+130) | ||
| Leads | 6“ Min | ||
| Weight Approx. | 80g | 105g | 135g |