Click on the image to view the original image
Application
It is suitable for installation on fixed buildings, structures, such as electric power towers, communication towers, chimneys, high-rise buildings, large bridges, large port machinery, large construction machinery, wind turbines and other obstacles to warn the aircraft.
Key Feature of CK-15-T
1.Overview
Feature:Low power, easy to install, Solar Powered.
Application:It is suitable for installation on fixed buildings, structures, such as electric power towers, communication towers, chimneys, high-rise buildings, large bridges, large port machinery, large construction machinery, wind turbines and other obstacles to warn the aircraft.
Name:Solar Power Medium Intensity Obstruction lights(Solar Power Supply)
Operation Environment:
Working temperature: -40 ° C to +55 ° C; Relative humidity: 0% ~ 95%;
Wind power: no more than 240km/h; rain: exposed to rain in any wind direction;
Salt spray: exposed to salt spray; irradiation: exposed to solar radiation.
Working conditions: input voltage: solar DC12V
2.Safety precautions
l Avoid installing at the top and bottom of the building. If installed on the top floor of a building, it is best to connect the ground wire to the lightning protection or install a lightning rod to avoid lightning strikes.
l When working on the product, it is strictly forbidden to open any part of the lamp body to prevent danger.
l This product will have a temperature rise during operation, which is normal.
l This product is a sealed structure. Non-professional maintenance personnel should not disassemble it. Once found, the company will not guarantee it.
3.Structure
|
|
4.Technical Feature
a) Main Feature
- Lamp shade of the light adopts PC with anti-UV which is high efficiency light transmission up to 90%, quite high impact resistance and fit the bad environment very well.
- House of the light is made of 304 stainless steel and aluminum alloy, the structure is high strength ,resistance to corrosion.
- Using special Pb battery with micro power consumption solar charging and discharge circuit protection, long life span and saving energy.
- Reflector used ABS material, with vacuum coating.
- Used micro consumption smart control system, and managed it exactly, low power consumption and energy saving.
- Four solar panel, which is full used in light.
- Light source adopts LED with long lifespan ,lower power consumption and high efficiency.
- Used the photosensitive probe fit for the natural light spectrum curve, automatic control light intensity level.
- The circuit of the light has surge protection whose lightning proof ability is inside.
- Light on at night with whit, off in the daylight, having monitoring function
b) Main Parameter
Items | Parameter |
Input Power | DC12V(Solar Powered) |
Power Consumption | ≤10W |
Flash Frequency | 20 40 60 times/min |
Light intensity | ≥2000cd |
Light Source | Red LED |
Life span | >100,000 hrs |
Lighting Emitting | Red |
Beam Angle | 360° horizontal beam angle |
≥3° vertical beam spread | |
Method of synchronization | Same power supply voltage signal mode |
Overall Size | 255mm×255mm×515mm |
Installation Size | Φ105mm-4×M10 |
Ingress Protection | IP65 |
Lightning protection level | 10KA |
Light controlled sensitivity | <50cd/m2 |
| ≤95% |
Weight | 17 kg |
Wind load | 80m/s |
Project Pictures
Recommend Product
Double Solar Power Medium Intensity Obstruction lights |
Type A high intensity Obstruction lights |
Type B Solar Power Medium Intensity obstruction lights |
Why us?
1.Have 1 office and 2 factory,total 6000 square meter
2.Have Own R&D Department,We can research the new product by ourself.
3.Have own optical laboratory
4.Have own QC Team
5.Supply Communication Tower,Transimission Towers,Chimney,Building Designing for Aviation obstruction lights.
6.7/24 hours Sales Team and After-Sales Team
Product Warranty
- Full warranty 3 years: We will provide Full three years’ guarantee for free that product is problem caused by quality.
- Free Maintenance 5 years: From the 4th year to 5th year, We will provide product maintenance for free, when it’s damage by improper using or some other
reason.(Note: Client should pay the freight to send product back) - When you use our product and have a failure, please contact with us. Don"t take it apart and repair it by yourself, Otherwise, we are not responsible for warranty.
Contact Us
| Contact Person: Jodie Shaw Whatsapp:+86 15907360172 Wechat:008615907360172 Skype ID: ucanter-parts Phone:86-15907360172 Tel:+86-0731-85563265 Fax:+86-0731-85563365 Website:https://www.cdt-en.com https://www.chendongtech.com |