Click on the image to view the original image
Product Description
- Parameter & Diagram
| Item | Parameter | |
| Model | CK-11-LS | |
| Operating Voltage | AC220V(other available) | |
| Power consumption | ≤5W | |
| Flashing frequency | Steady Burning | |
| Light Source | Red LED | |
| Light Intensity | >32.5cd | |
| Life span | >100,000 hours | |
| Emitting color | Red | |
| Beam angle | 360° horizontal beam angle | |
| ≥10° vertical beam spread | ||
| Method of synchronization | Same power supply voltage signal mode | |
| Overall size(mm) | 270mm×360mm | |
| Installation size(mm) | 90mm×-4xM10 | |
| Ingress protection | IP65 | |
| Lightning protection level | 10KA | |
| Light Controlled Sensitivity | 100Lux | |
| Operating temperature | -40℃~55℃ | |
| Net weight | 3KG | |
| Wind load | 80m/sec. |
- Specification
- Lamp shade of the light adopts PC with anti-UV which is high efficiency light transmission
up to 95%,quite high impact resistance and fits the bad environment very well. - House of the light is made of aluminum alloy, painted by spraying plastics, the structure is
high strength, resistance to corrosion; - Using parabolic reflector optical design, range further;
- Light source adopts LED with long lifespan, lower power consumption and high efficiency.
- Based on the single chip computer control, automatic identification sync signal, do not
distinguish the main light and auxiliary light, and also could be controlled by the controller; - Same power supply voltage with synchronous signal, integrate in power supply cable,
eliminate the damage by error installation caused; - Used the photosensitive probe fit for the natural light spectrum curve, automatic control
light intensity level; - The circuit of the light has surge protection whose lightning proof ability is In 7.5KA/5times,
Imax 15KA so that the light is suitable for a harsh environment; - Integral structure, protection level of Ip65;
- Ignitability rate UL-94V0, fit for all kinds of industrial situation;
Any interested,Please contact with us --- Jodie Shaw Phone/Wechat/Whatsapp:86-15907360172
Installation Usage
FAQ
| 1.Synchronized Flashing Units Can"t work Simultaneously | |
| A. Monitor Function Type Requires Power Line seperate from signal line,the power circuit of each unit can be independently connected,pls check signal circuit was connected by corresponding color when ensure power supply works normally. | |
| B. Check if there"s short circuit or leakage phenomenon with the signal circuit after excluding the condition above. | |
| 2.Light-operated switch can"t work normally | |
| A.The Unit can"t work at day: Pls check if the light-operated detector is closed over by dust; | |
| B. The Unit can"t work at night: Pls check if light-operated detector is influenced by direct light or strong reflective light; | |
| C. esting the unit at day: Most of customers test the unit by Closing over the light-operated detector using their hands.Since the strong Radiation of sunshine,the light-operated function can"t work.The proper method is using 3 layers of black opacity adhesive tapes. | |
| 3.Are you the Manufactory or Trading? | |
| Our company is professional Manufactory to produce the Aviation Obstruction light. | |
| 4.What Kind of Package you choose? | |
| As usual,we use the Carton Box; If delivery by sea,we will use the Wooden case to pack. | |
| 5.What’s your warranty? | |
| Full Warranty:2-5 Years. | |
| 6.Do you accept OEM/ODM service? | |
| Yes.We can supply you OEM/ODM service to you. Cause we are the manufacturer. There is professional R&D team in our company. | |
Contact Us
| Contact Person: Jodie Shaw Whatsapp:+86 15907360172 Wechat:008615907360172 Skype ID: ucanter-parts Phone:86-15907360172 Tel:+86-0731-85563265 Fax:+86-0731-85563365 Website:https://www.cdt-en.com https://www.chendongtech.com | |