Click on the image to view the original image
Uing Range of Rotating Beacon
This handbook describes apron rotation beacons manufactured to FAA AC 150 / 5345-12 and ICAO Annex 14 and Airport Design Manual. Please strictly follow the FAA and ICAO and other relevant provisions of the norms of the use of the lamp.
2.0 Application Environment
Altitude below 2500 meters;
Outdoor: -40 ℃ - +55 ℃;
Relative humidity: 95%; (+ 24.5 ℃), the maximum humidity can be greater than 100%;
Rain, snow, ice, water;
corrosive salt spray.
2.1 Technical Characteristics
* Light intensity, light color meet the requirements.
* Sophisticated optical control, light utilization, high brightness, outstanding optical performance.
*Lamps shape is handsome, good thermal performance, well-designed.
*The lamp uses a split structure, reducing impurities and moisture into the lamp, improving the service life of lamp optics, reducing the number of maintenance operations.
*The main body of the lamp is made of aluminum alloy, the fastener is made of stainless steel, and the anti-corrosion performance is good.
*Adopts high-precision machine tool processing, ensuring a full range of lamps quality and accuracy.
2.2 Technical Indicators
Halogen lamp3*150W
Lamp Using Life: ≥1000 hours
White,Green,Yellow Color
Lamp angle can be adjusted
12 rev / min, 36 times per minute flash
304 Steel cabinet with powder layer
Voltage: AC220V AC230V 50Hz 60Hz
If interested,Pls contact with me.Thanks
If interested,Pls contact with me.Thanks
Application
Tower ,Crane
Wind Power Generator
High-Building
Chimney,Heliport
Water or Cooling Tower
Certification
ICAO
FAA
CAAC
CE
Company Type
Synchronized Flashing Units Can"t work Simultaneously
A.Monitor Function Type Requires Power Line seperate from signal line,the power circuit of each unit can be independently connected,pls check signal circuit was connected by corresponding color when ensure power supply works normally.
B.Check if there"s short circuit or leakage phenomenon with the signal circuit after excluding the condition above.
Light-operated switch can"t work normally
A.The Unit can"t work at day: Pls check if the light-operated detector is closed over by dust;
B.The Unit can"t work at night: Pls check if light-operated detector is influenced by direct light or strong reflective light;
C.Testing the unit at day: Most of customers test the unit by Closing over the light-operated detector using their hands.Since the strong Radiation of sunshine,the light-operated function can"t work.The proper method is using 3 layers of black opacity adhesive tapes.
Any question for product,Pls contact with us!
Contact Person: Jodie Shaw
Wechat/Whatsapp/Phone:86-15907360172
Skype ID:ucanter-parts
Tel:+86-0731-85563165 85563265
Fax:+86-0731-85563365
Inquiry Here!