Click on the image to view the original image
Product Description
ItemParameter
Operating voltageAC220V
Power consumption≤10W
Flashing frequency20～60times/min.
Light intensity2000cd-20000cd
Light sourceWhite LED
Lifespan＞100,000 hours
Emitting colorRed
Beam angle360° horizontal beam angle
≥3° vertical beam spread
Method of synchronizationSame power supply voltage signal mode
Overall size(mm)φ210mm×140mm
Installation size(mm)126mm×126mm-4×M10
Ingress protectionIP65
Lightning protection level10KA
Photocell sensitivity100Lux
Ambient humidity≤95%
Ambient temperature-40℃～55℃
Net weight2.5kg
Wind load80m/sec.
Features:
● Cover of the light adopts PC with anti-UV which is high efficiency light transmission up to 90%, quite high impact resistance and fit the bad environment very well;
● House of the light is made of aluminum alloy and painted by spraying plastics, the structure is high strength, resistance to corrosion;
● Use the special optical reflector design, the visual range further, angle more accurate, no light pollution.
● Light source adopts import high quality LED, lifespan up to 100,000 hours, low power consumption, energy efficiency and environment protection.
● Based on the single chip computer control, automatic identification sync signal, do not distinguish the main light and auxiliary light, and also could be controlled by controller.
● Same power supply voltage with synchronous signal, integrate in power supply cable, eliminate the damage by error installation caused.
● Used the photosensitive probe fit for the natural light spectrum curve, automatic control light intensity level.
● The circuit of the light has surge protection, so that the light is suitable to harsh environment
● Integral structure, protection lever of IP65
● GPS synchronizing function is available
CK-15 Medium Intensity Obstruction Light Type B Installation:
（1）The obstruction light is horizontal installation type, combine with vertical type mounting bracket, please refer to below picture.
（2While installing, please do not put photosensitive probe toward light source or covered by other things.
Schematic Diagram
Wiring:
（1）Connector distinguish: The CK-15 obstruction light has a cable with 4 cores, in which the brown and black lines are power supply lines (AC220V), the brown one is Live Line (L), the black one is Null Line (N), the blue one is Signal Line (X), and the yellow green one is Earth Line (E).
（2）Wring instructions:
a. When connecting one unit light, only the brown live line(L), the black null line(N) and the yellow green earth line(E) need to be connected. The blue synchronized signal no need to be connected.
b. When connecting more than one unit light, all lines need to be connected so that the lights can be flashing synchronized.
Widely used in various fields of the Air Force, civilian airports and obstacle free airspace, helipads, iron tower, chimney, ports, wind power plants, bridge and city high-rise buildings where require aviation warning.
ABOUT CDT
Hunan Chendong Technology Co.,LTD （shorted as CDT）is a professional manufacturer for Green navigational aids products, mainly for aviation obstruction lights, helipad lightings and meteorological target lamp in China . CDT got ISO 9001:2008 certification the first year when established.
As pioneer in China, our products are approved by ICAO and CAAC certificate. CDT keep acting as a solution provider for customers with specialty. And our products have been exported over 50 countries and areas all over the world.
Free Maintenance 5 years: From the 4th year to 5th year, We will provide product maintenance for free, when it’s damage by improper using or some other reason.(Note: Client should pay the freight to send product back)
Lifelong Maintenance: From the 6th year ,We would provide excellent service for customer if have any problems, but Client need pay the freight and maintenance cost.
When you use our product and have a failure, please contact with us. Don"t take it apart and repair it by yourself, Otherwise, we are not responsible for warranty.
1. Where can CDT’s lights be used for?
Widely used in various fields of the Air Force, Civil airport and obstacle free airspace, heliport, Electric Tower, Telecommunications Tower, Chimney, Ports, Wind Power Plants, Bridges and High-Rise Building.
2. CDT’s aviation obstruction light meet and exceed the performance of comparable AC/DC grid powered light.
The benefit of Choosing CDT airfield lighting include:
A, Durable, Reliable :
QC test for compliance guarantees safety on your airfield; Also will put product in Aging Room to test 24hours before delivery.
B, Fast installation and Easy Operation:
Install in minutes instead of days---will supply English Version Operation Manual. Also CDT light has GPS synchronizing function to be set of turn on and off automatically.
C, Fast delivery:
CDT has large stock and also have three working line to produce lights. As usual, after payment, we will delivery product about 2 weeks.
Cooperated with DHL, UPS, TNT, FedEx, and some special airline to point country.
3. How does CDT lights working?
CDT airfield light contains several parts that work together
A.AC aviation obstruction light have LED, Electrical output Cable and an intelligent energy management system
B.Solar Power Aviation Obstruction light have Solar Panels, batteries, LEDs and an intelligent energy management system