- Type:
- Aviation Obstruction Lights
- Input Voltage(V):
- AC220V/6.6A
- Lamp Power(W):
- 20
- Lamp Luminous Flux(lm):
- 0
- Lamp Luminous Efficiency(lm/w):
- 0
- CRI (Ra):
- 0
- Color Temperature(CCT):
- Red and White
- Beam Angle(°):
- 360
- IP Rating:
- IP65
- Certification:
- BV, CE, EMC, RoHS
- Emitting Color:
- Red and White
- Lamp Body Material:
- anti-UV
- Base Type:
- Others
- Light Source:
- LED
- Place of Origin:
- Hunan, China
- Brand Name:
- CDT
- Medium Intensity Obstruction Light:
- civilian airports and obstacle free airspace
- Supply Ability:
- 10000 Unit/Units per Month
- Packaging Details
- paper carton&wooden carton
- Port
- Shanghai ,Guangzhou and Shenzhen
- Lead Time:
Quantity(Units) 1 - 50 >50 Est. Time(days) 7 To be negotiated
Product Description
Specification:
This product complies with the Consultation Announcement AC150/5345-27C and L-806 of U.S. Federal Aviation Administration (FAA), Appendix 14-Airport of International Civil Aviation Organization (ICAO) and the specifications in Part Four of Airport Design drafted by ICAO.
The max designed wind speed is 260kph. But if the area wind speed or Ultraviolet strength is too high, it will shorten the wind sleeve’s lifespan.
Connect the wire in the bottom and 2.5mm wire terminal is available.
Features:
CM-HT12/F Illumination Vane can be used as a sign in all kinds of airport to observe the wind power and wind direction in both daytime and night.
On the top installed one red LED obstruction light, provide the obstacle hint for the pilot at night.
On the upper of the pole installed a light stainless wind sleeve frame and one 360°rotation gear.
Inside of the wind sleeve frame installed one waterproof LED spotlight, it will turn with the wind sleeve, could light the wind sleeve directly, not like the old outside flood light, then eliminate the power consumption and against the eye flare.
On the wind sleeve frame installed one wind sleeve which is made of corrosion-resistant and high-temperature-resistant nylon anti-UV material, and lifetime is long. The color is red(orange) and white, have 5 sections, the start color is red(orange). The wind sleeve including 3 dimensions according to the pole’s height.
1#The diameter is 300mm, the diameter at small end is 150mm and the length is 1.2m
2#The diameter is 600mm, the diameter at small end is 300mm and the length is 2.4m
3#The diameter is 900mm, the diameter at small end is 450mm and the length is 3.6m
How to choose the wind sleeve? Below 4m, use the first type;between 4m to 6m, use the sencond type; above 6m, use the third type.
On the bottom of the pole, it has a control box, you could choose the wind vany with the photoswitch;the power supply cable into the control box directly.
The pole and the base all use the SUS304 stainless. The windsock height could be 2m,3m,4m,5m,6m or as buyer’s requirement; when the total height more than 9m, you could add the stay wire in order to increase the stability; when the windsock height more than 4m, you could choose the hinges base so that could install more steady.
CM-HT12/F4 Wind Vane Installation Manual
Installation:
(1)At the selected mounting position place concrete foundation of 1m*1m*1,pre-embeded 7pcs M20*800MM screws, 70mm higher than the ground;
(2)Put the windsock into the frame, use the velcro to fix it, and check if it is fastness between the frame and rotation device, make sure bolt-on and that two fixed jaw of the frame are fastness.(Windsock need to replace per year)
(3)Connect the wind vane as the installation diagram, checking the rotating of the windsock, if it is rotating not smoothly, add some lubricant into the swivel bearing.
(4)Then link the wires of the lights, check if the obstruction light on the top and the spot light in the frame is working normal.
Confirm all is ok, align the wind vane’s foundation and the pre-embed M20 screws, then tighten up. Then check the installation support’s perpendicularity, if have the incline, adjust it.
(5)Connect the null line, fire wire, ground wire with electric supply.
(6)Wind vane have the rotational structure, could put down, is easy to install and maintenan
Application:
CM-HT12/F heliport Wind vane is to indicate the wind direction of the final approach and take-off, it can make a general indication to the wind speed. According to the ICAO provisions for each airport must be set at least one wind vane. Its installation location must not interferenced by nearby objects or the airflow blowed by the rotor, and must be guaranteed the helicopter can be clearly identified at least in 200 meters away.
ABOUT CDT
Hunan Chendong Technology Co.,LTD (shorted as CDT)is a professional manufacturer for Green navigational aids products, mainly for aviation obstruction lights, helipad lightings and meteorological target lamp in China . CDT got ISO 9001:2008 certification the first year when established.
As pioneer in China, our products are approved by ICAO and CAAC certificate. CDT keep acting as a solution provider for customers with specialty. And our products have been exported over 50 countries and areas all over the world.
Free Maintenance 5 years: From the 4th year to 5th year, We will provide product maintenance for free, when it’s damage by improper using or some other reason.(Note: Client should pay the freight to send product back)
Lifelong Maintenance: From the 6th year ,We would provide excellent service for customer if have any problems, but Client need pay the freight and maintenance cost.
When you use our product and have a failure, please contact with us. Don"t take it apart and repair it by yourself, Otherwise, we are not responsible for warranty.
1. Where can CDT’s lights be used for?
Widely used in various fields of the Air Force, Civil airport and obstacle free airspace, heliport, Electric Tower, Telecommunications Tower, Chimney, Ports, Wind Power Plants, Bridges and High-Rise Building.
2. CDT’s aviation obstruction light meet and exceed the performance of comparable AC/DC grid powered light.
The benefit of Choosing CDT airfield lighting include:
A, Durable, Reliable :
QC test for compliance guarantees safety on your airfield; Also will put product in Aging Room to test 24hours before delivery.
B, Fast installation and Easy Operation:
Install in minutes instead of days---will supply English Version Operation Manual. Also CDT light has GPS synchronizing function to be set of turn on and off automatically.
C, Fast delivery:
CDT has large stock and also have three working line to produce lights. As usual, after payment, we will delivery product about 2 weeks.
Cooperated with DHL, UPS, TNT, FedEx, and some special airline to point country.
3. How does CDT lights working?
CDT airfield light contains several parts that work together
A.AC aviation obstruction light have LED, Electrical output Cable and an intelligent energy management system
B.Solar Power Aviation Obstruction light have Solar Panels, batteries, LEDs and an intelligent energy management system