Click on the image to view the original image
Product Description
Specifications:
ItemParameter
Operating voltageAC220V
Power consumption≤30W
Flashing frequency20～60times/min.
Light intensity2000cd-20000cd
Light sourceWhite LED
Lifespan＞100,000 hours
Emitting colorWhite
Beam angle360° horizontal beam angle
≥3° vertical beam spread
Method of synchronizationSame power supply voltage signal mode
Overall size(mm)268mm×268mm×206mm
Installation size(mm)166mm×166mm-4×M10
Ingress protectionIP65
Lightning protection level10KA
Photocell sensitivity100Lux
Ambient humidity≤95%
Ambient temperature-40℃～55℃
Net weight7kg
Wind load80m/sec.
Features:
● Cover of the light adopts PC with anti-UV which is high efficiency light transmission up to 90%, quite high impact resistance and fit the bad environment very well;
● House of the light is made of aluminum alloy and painted by spraying plastics, the structure is high strength, resistance to corrosion;
● Use the special optical reflector design, the visual range further, angle more accurate, no light pollution.
● Light source adopts import high quality LED, lifespan up to 100,000 hours, low power consumption, energy efficiency and environment protection.
● Based on the single chip computer control, automatic identification sync signal, do not distinguish the main light and auxiliary light, and also could be controlled by controller.
● Same power supply voltage with synchronous signal, integrate in power supply cable, eliminate the damage by error installation caused.
● Used the photosensitive probe fit for the natural light spectrum curve, automatic control light intensity level.
● The circuit of the light has surge protection, so that the light is suitable to harsh environment.
● Integral structure, protection lever of IP65
● GPS synchronizing function is available
CM-15 Medium Intensity Obstruction Light Type A Wiring Instruction:
（1）Cable distinguish: This light has a cable with 3 cores in which the brown line and black line are power line (AC220V). The brown line is Live line (L), the black line is Null line (N), the yellow green line is Earth line.
（2）Wiring instructions:
a. when connecting one unit, the brown Live line (L), black Null line (N), and yellow green Earth line need to be connected.
b. when connecting more than one unit, all lights’ brown Live line (L), black Null line (N) and yellow green Earth line need to be connected. And GPS can make them synchronously flashing within 10 minutes.
（3）GPS synchronization mode should be tested on outside without cover. It may takes 10 minutes to achieve synchronization.
Caution:
● All the connections must be correct, otherwise it will damage the lights, please check the mark and instruction carefully.
● The power supply is AC220, can’t use other powers, otherwise it will damage the lights.
● The obstruction light need to be installed below lightning conductor or lightning protection zone, in case light be struck by lightning.
● It’s normal if temperature rise while operating.
● Please do not open any part of lights while operating.
● The light is fully sealed, please do not install or dismantle unless you are professional. Once operated inappropriately, our company will not guarantee the warranty.
ABOUT CDT
Hunan Chendong Technology Co.,LTD （shorted as CDT）is a professional manufacturer for Green navigational aids products, mainly for aviation obstruction lights, helipad lightings and meteorological target lamp in China . CDT got ISO 9001:2008 certification the first year when established.
As pioneer in China, our products are approved by ICAO and CAAC certificate. CDT keep acting as a solution provider for customers with specialty. And our products have been exported over 50 countries and areas all over the world.
Free Maintenance 5 years: From the 4th year to 5th year, We will provide product maintenance for free, when it’s damage by improper using or some other reason.(Note: Client should pay the freight to send product back)
Lifelong Maintenance: From the 6th year ,We would provide excellent service for customer if have any problems, but Client need pay the freight and maintenance cost.
When you use our product and have a failure, please contact with us. Don"t take it apart and repair it by yourself, Otherwise, we are not responsible for warranty.
1. Where can CDT’s lights be used for?
Widely used in various fields of the Air Force, Civil airport and obstacle free airspace, heliport, Electric Tower, Telecommunications Tower, Chimney, Ports, Wind Power Plants, Bridges and High-Rise Building.
2. CDT’s aviation obstruction light meet and exceed the performance of comparable AC/DC grid powered light.
The benefit of Choosing CDT airfield lighting include:
A, Durable, Reliable :
QC test for compliance guarantees safety on your airfield; Also will put product in Aging Room to test 24hours before delivery.
B, Fast installation and Easy Operation:
Install in minutes instead of days---will supply English Version Operation Manual. Also CDT light has GPS synchronizing function to be set of turn on and off automatically.
C, Fast delivery:
CDT has large stock and also have three working line to produce lights. As usual, after payment, we will delivery product about 2 weeks.
Cooperated with DHL, UPS, TNT, FedEx, and some special airline to point country.
3. How does CDT lights working?
CDT airfield light contains several parts that work together
A.AC aviation obstruction light have LED, Electrical output Cable and an intelligent energy management system
B.Solar Power Aviation Obstruction light have Solar Panels, batteries, LEDs and an intelligent energy management system