Click on the image to view the original image
Ref standard | ICAO Appendix 14 Low intensity obstruction light FAA-L810 | ||
Light source | LED | Emitting color | red |
Light intensity | ≥32.5cd | Vertical beam spread | ≥10° |
Horizontal beam angle | 360° | Power consumption | ≤5W |
Operation voltage | AC220V | Voltage frequency | 50HZ/60HZ |
Lifespan | ≥100,000h | Working mode | Steady burning |
Light controlled sensitivity | 50~100 lux | Wind load | ≥ 80m/s |
Operation temperature | -40℃~+55℃ | 0%~90% | |
IP Grade | IP65 | Net Weight | 1.5Kg |
1) Installed the light on horizontal surface that have enough strength.
2)When installing, pls don’t put the photocell face the nearby light source, also can’t be hidden by the nearby objects.
3)The identification of the line, lamps with one four-core cable: the brown and black line is the power line, the brown wire is the live wire (L), the black wire the null line (N); the yellow-green wire is the ground wire. Blue is signal line
4)Connection:
A: When the lamps use single, the brown wire connect to the Live line, black wire connect to Null wire, , then the light could work normally;
B: When more than one lights need to synchronization, all the lights’ brown wire connect to the live line, all the black wire connect to the null line, could arrive synchronization flashing.
5)For the GPS synchronization function test, pls do it outdoor and no shade environment, it will need about 10 minutes.(Only for the GPS synchronization type)
Attention
1)All the lines must be connected correctly, otherwise may damage the light. Please look at the mark and introduction carefully.
2)The power supply of this type of light is AC220V. Do not use other power supply, such as 380V, otherwise the light will be quickly damaged.
3)In order to avoid being struck by lightning, the lamp is prohibited to install on the top or the edge of the iron tower (When necessary, it could add lightning arrester on the outside of the lamps).
4)There will be a temperature rise when working, it is normal situation.
5)When the light working, in order to avoid the dangerous, pls don’t open any part of the light body.
6)This product is a sealing structure, pls don’t dismounting if you are non-professional technicians, Otherwise, we are not responsible for warranty repair.
| 1.Synchronized Flashing Units Can"t work Simultaneously | |
| A. Monitor Function Type Requires Power Line seperate from signal line,the power circuit of each unit can be independently connected,pls check signal circuit was connected by corresponding color when ensure power supply works normally. | |
| B. Check if there"s short circuit or leakage henomenon with the signal circuit after excluding the condition above. | |
| 2.Light-operated switch can"t work normally | |
| A.The Unit can"t work at day: Pls check if the light-operated detector is closed over by dust; | |
| B. The Unit can"t work at night: Pls check if light-operated detector is influenced by direct light or strong reflective light; | |
| C. esting the unit at day: Most of customers test the unit by Closing over the light-operated detector using their hands.Since the strong Radiation of sunshine,the light-operated function can"t work.The proper method is using 3 layers of black opacity adhesive tapes. | |
| 3.Are you the Manufactory or Trading? | |
| Our company is professional Manufactory to produce the Aviation Obstruction light. | |
| 4.What Kind of Package you choose? | |
| As usual,we use the Carton Box; If delivery by sea,we will use the Wooden case to pack. | |
| 5.What’s your warranty? | |
| Full Warranty:2 Years. | |
| 6.Do you accept OEM/ODM service? | |
| Yes.We can supply you OEM/ODM service to you. Cause we are the manufacturer. There is professional R&D team in our company. | |
Contact Person: Jodie Shaw
Wechat/Whatsapp/Phone:86-15907360172
Skype ID:ucanter-parts
Tel:+86-0731-85563165 85563265
Fax:+86-0731-85563365
Welcome to Call us !