ETL DLC CE best selling modern pathway landscape post top street lamp 3m 50w outdoor led garden lighting pole lights fixtures
Benefits
1.Replace conventional area light.
2.Precision die cast aluminum housing.
3.Fade resistant powder coat finish.
4.Easy installation.
5.ETL CETL SAA TUV CE ROHS listed.
Features
1.Beam angle : 120 degrees.
2.Aluminum die casting heat sinks is good for heat dissipation.
3.It's major to replace the conventiona area light.
4.Green ,energy saving,long and relialble life of 50,000 hours.
5.No RF interference ,no IR / UV radiation,no mercury pollution.
6.Wide colour availability in degrees Kelvin(K),2700-6700K.
7.Streamline exterior design,beautiful appearance.
8.Environment friendly ,energy saving (70%~80%).
9.Special circuit design,each LED work separately,avoiding the single broken LED influence problem.
Application
1.Area roadway lighting.
2.Parking area lighting.
3.Airport lighting.
4.Street lighting.
5.Campus lighting.
5.Other application adaway.
Specifications
Power | 30W | 50W | 75W | 100W |
Model | BB-LD-30W-AR-B | BB-LD-50W-AR-B | BB-LD-75W-AR-B | BB-LD-100W-AR-B |
Replacement | HPS 100W | HPS 175W | HPS 200W | HPS 300W |
Luminous Flux | 3900lm | 6500lm | 9750lm | 13000lm |
Light Source | SMD LED | |||
Luminous Efficacy | >130lm/w 150lm/w available | |||
Voltage |
100-277VAC/50-60HZ
|
|||
CRI | 85 | |||
Color | Black,bronze,white(the default color is black) | |||
Cover | Frosted cover | |||
Accessories | Option:A.Pole bracket B.With sensor C.Wall bracket | |||
DLC Certification | Type DLC listed | |||
Operation Temp. | -40 to +45℃ | |||
CCT | 2700K SW/3000K WW/4100K NW/5000K DW/5700K CW | |||
Life Span | 50,000 hours at 25℃ | |||
Dimming | NO | |||
Beam Angle | 120° | |||
PF | >0.95 | |||
IP | 67 | |||
Warranty | 5 Years |
Dimensional Drawing
If the customer does not specify a requirement ,the inner diameter defaults to 62mm.
By using our 100w LED area light to replace 300w metal halide bulb for parking garage lighting lighting fixtures,the customer is now able to save a lot per month from his electric bill.
1.Don't take the LED lamp apart.
2.The LED lamp must work under the right voltage according to the specification.