Guangdong Vovica Home Technology Co., Ltd.

Features: 6 pins

1. P/N.:WS2812S

2. Input voltage: DC5V

3. IC Type: WS2811 Chip

4. Power: 0.24W/pcs

5. Package Type: SMD 5050

6. One IC Control One LED WS2812

7. SPQ: 1000 PCS/REEL 

• The control circuit and the LED share the only power source.

• Control circuit and RGB chip are integrated in a package of 5050 components, to form a complete addressable pixel.

• Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.

• Built-in electric reset circuit and power lost reset circuit.

• Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color display, and scan frequency is of 2KHz.

• Cascading port transmission signal by single line.

• Any two point the distance not more than 3m transmission signal without any increase circuit.

• When the refresh rate is 30fps, cascade number are not less than 1024 pixels.

• Send data at speeds of 800Kbps.The color of the light is highly consistent, cost-effective..

• Full-color module, Full color soft lights a lamp strip.

• LED decorative lighting,Indoor/outdoor LED video irregular screen.

Features: 4 pins

1. Ver No.:V5

2. Input Voltage: DC5V

3.Power: 0.24W/PCS

4. Package Type: SMD 5050

5. One IC Control One LED WS2812

6. SPQ: 1000 / 4500 PCS/REEL

• The control circuit and the LED share the only power source.

• Control circuit and RGB chip are integrated in a package of 5050 components, to form a complete addressable pixel.

• Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.

• Built-in electric reset circuit and power lost reset circuit.

• Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color display, and scan frequency is of 2KHz.

• Cascading port transmission signal by single line.

• Any two point the distance not more than 5m transmission signal without any increase circuit.

• When the refresh rate is 30fps, cascade number are not less than 1024 pixels.

• Send data at speeds of 800Kbps.

• The color of the light is highly consistent, cost-effective.

• No need for external electric components and even the capacitor.

• Full-color module, LED full-color soft/hard light bar, LED guardrail tube.

• LED decorative lighting, LED Screen, Indoor/outdoor LED video irregular screen, various electronic products, electrical equipment marquee.

Ditto.

Ditto.

Features:

1. P/N.:WS2812B-MINI

2. Ver No: V3

3. Input voltage: DC5V

4. Power: 0.24W/PCS

5. Package Type: SMD 3535

6. One IC control one LED WS2812

7. SPQ: 900 / 3000 PCS/REEL

• The IC’s control circuit and the LED share the same power supply.

• Control circuit and RGB chip are integrated in a package of 3535 component, to form a complete external control pixel.

• Built-in signal reshaping circuit, any pixel receives the signal, and then re-export after waveform reshaping to ensure that the waveform distortion of the circuit will not accumulate.

• Built-in Power-on reset and Power-off reset circuits.

• The three primary color of each pixel can achieve 256 level Gray scale, and to fulfill 16777216 colors full-color display, its scan frequency is higher than 2KHz.

• The reception and decoding of cascading data can be completed by a Serial Interface.

• Any two transmission distance not more than 3 Meters, without adding any circuit.

• When the refresh rate is of 30fps, the cascade numbers are not less than 1024 pixels.

• Data transfer speeds up to 800Kbps.

• Highly brightness consistency, and cost-effective.

• No need for external electric components and even the capacitor.

• It won’t be damaged even if the power supply reversed connected.

• Full-color module, Full-color flexible strip. 

• LED decorative lighting,Indoor/outdoor LED video irregular screen.

• The control circuit and the LED share the only power source.

• Control circuit and RGB chip are integrated in a package of 5050 components, to form a complete addressable pixel.

• Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.

• Built-in electric reset circuit and power lost reset circuit.

• Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color display, and scan frequency is of 2KHz.

• Cascading port transmission signal by single line.

• Any two point the distance not more than 3m transmission signal without any increase circuit.

• When the refresh rate is 30fps, cascade number are not less than 1024 pixels.

• Send data at speeds of 800Kbps.

• The color of the light is highly consistent, cost-effective..

• Full-color module, Full color soft lights a lamp strip.

• LED decorative lighting,Indoor/outdoor LED video irregular screen

• The control circuit and the LED share the only power source.

• Control circuit and RGB chip are integrated in a package of 5050 components, to form a complete addressable pixel.

• Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.

• Built-in electric reset circuit and power lost reset circuit.

• Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color display, and scan frequency is of 2KHz.

• Cascading port transmission signal by single line.

• Any two point the distance not more than 3m transmission signal without any increase circuit.

• When the refresh rate is 30fps, cascade number are not less than 1024 pixels.

• Send data at speeds of 800Kbps.

• The color of the light is highly consistent, cost-effective..

• Full-color module, Full color soft lights a lamp strip.

• LED decorative lighting,Indoor/outdoor LED video irregular screen.

 Features:

1. Input voltage: DC5V

2. IC Type: WS2818 chip

4. Power: 0.24 W/PCS

5. Package Type: SMD 5050

6. One IC Control One LED WS2813

7. SPQ: 1000 / 4500 PCS/REEL

 Ditto.

 Ver No: V5

Features:

1. Input voltage: DC5V

2. White Surface

3. Power: 0.24 W/PCS

4. Package: SMD 3535

5. One IC Control One LED WS2813

6. SPQ: 1500 PCS/REEL

Features:

1.  Input voltage: DC5V

2. Molding Type

3. Power: 0.24 W/PCS

4. Package: SMD 5050

5. One IC Control One LED WS2813

6. SPQ: 4500 PCS/REEL

Features

1. Input voltage: DC5V

2. Ver No: V2

3. Power: 0.24W/PCS

4.Package: SMD 5050

5. One IC Control One LED WS2813

6. SPQ: 1000 / 4500 PCS/REEL

Features:

1. P/N.:WS2815B

2. Input voltage: DC12V

3.White and black surface avilable

4.Power: 0.24W/PCS

5.Package Type: SMD 5050

6.One IC Control One LED WS2815

7. SPQ: 1000 / 4500 PCS/REEL

Features:

1. Input voltage: DC12V

2. Black surface

3. Power: 0.24W/PCS

4. Package Type: SMD 5050

5. One IC Control One LED WS2815

6. SPQ: 1000 / 4500 PCS/REEL

Features:

1. P/N.:WS2812C-2020

2. Small size: 2022 package

3. 5mA operating current per channel

4. One IC Control One LED WS2812

5. Small size, Big function!

• The control integrated circuit and the LED share the only power source.

• 5mA operating current per channel.

• Control circuit and RGB chip are integrated in a package of 2020 components, to form a complete addressable pixel.

• Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.

• Built-in electric reset circuit and power lost reset circuit.

• Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color display, and scan frequency is of 2KHz.

• Cascading port transmission signal by single line.

• Any two point the distance not more than 5m transmission signal without any increase circuit.

• When the refresh rate is 30fps, cascade number are not less than 1024 pixels.

• Send data at speeds of 800Kbps.

• The color of the light is highly consistent, cost-effective.

• Full-color module, Full color soft lights a lamp strip.

• LED decorative lighting,Indoor/outdoor LED irregular screen, game machine and amusement equipment etc.

Features:

1. P/N.:WS2812B-2020

2. 16mA operating current per channel

3. Small size: 2022 pachage

4. Small size, big function.

• The control integrated circuit and the LED share the only power source.

• 12mA operating current per channel.

• Control circuit and RGB chip are integrated in a package of 2020 components, to form a complete addressable pixel.

• Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.

• Built-in electric reset circuit and power lost reset circuit.

• Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color display, and scan frequency is of 2KHz.

• Cascading port transmission signal by single line.

• Any two point the distance not more than 3m transmission signal without any increase circuit.

• When the refresh rate is 30fps, cascade number are not less than 1024 pixels.

• Send data at speeds of 800Kbps.

• The color of the light is highly consistent, cost-effective.

• With reverse power connection, it will not be damaged.

• All external electronic components including capacitors are not required.

• Consumer Electronics,LED lighting.

• LED decorative lighting,Indoor/outdoor LED irregular screen, game machine and amusement equipment etc