Click on the image to view the original image
Application:
Suitable for oil field, railway, electrical industry ,cabin ,forces, firefreighting, sinopec
Features and benefits
1. Products imported high-power LED chip, luminous efficiency, long life, supporting fins devices. Spot can be customized according to user requirements.
2. The use of high-capacity lithium battery, the working time can reach more than 12 hours (main light), low-light mode up to 100 hours.
3. The selection of microcontroller memory circuit mode, so that the switch life longer and more sensitive, at every stall lighting mode, hold down the switch for three seconds, lights automatically turn off, the next or previous open position when closed. Bright light into 100%, respectively, 40% light low-light, low light 20% brighter times.
The whole mold seals fully sealed design, tempered glass and advanced silicone ring protection, the new ABS material, the thickness of the thinnest place for 4mm, achieve diving proof quality.
5. Charge hole using inserts copper wire system, not a permanent bad, charging contacts and good. Charger IC solutions using electronic circuits, high efficiency charging safety.
6. The charger uses IC program, charging methods: Want charger into 220v AC, green light, and then the corresponding fixture charging terminal insertion slot, the red indicator light (charging conduct). Charging time is generally not more than 12 hours, the green indicator light which will show the end of charge. Then unplug the charger from 220v outlet, and then pull the charging terminals.
7. The memory switch Tutorial: Tap switch, the first tranche of 100% light, and then tap, 40 percent off, 20 percent of third tap light. In each work mode, press for 3 seconds, the circuit is closed, the next stall tap is closed. Memory is divided into four files:.. A light, B low light, C sub low light, D closed.
Technical parameters