Click on the image to view the original image
This product is no luminous spot flexible white LED light strip, the light all through the chip surface
coverage arc fluorescent colloid and substrate surface coating of high reflection refraction ink out, achieve
intensive continuous luminous effect. Largest lighting angle up to 180 °, the thickness of only
1.5mm,minimum bending radii 2cm. It is take 3M adhesive on the back.
LED Flexible Strips
COB VS SMD
Specifications
Product ID | YUNFEI-LWD24BB20-D9-210 |
Voltage | DC24V |
CCT | 3000K |
Flux | 1000 lm/m |
LED Quantity | 210 LED/m |
PCB Width | 8mm |
RA | >90 |
SDCM | <5 |
Cuttable length | 100mm |
IP Rate | IP20, indoor use |
Packing | 5 m/reel with anti-static bag packing. Blue thermal conductive tape on the back, red and black wires at one end |
Product presentation
Product Features
Application
This product is suitable for hotels, shopping malls, home furnishing, cabinets, exhibition racks, etc., cooperate with
aluminum profile can used for main lighting, indirect lighting, dark slot lighting, outline drawing, decorative lighting and
other purposes.
aluminum profile can used for main lighting, indirect lighting, dark slot lighting, outline drawing, decorative lighting and
other purposes.
Product size and appearance drawing
Schematic diagram of electrical connection
Note: Make sure light strips is connected to the power supply with correct polarity. In general, the red line is positive and the black line is negative. The maximum connection length is 5M
Installation instructions