Click on the image to view the original image
automatic led emergency exit light for building elevator
The tube works under normal supply of AC power, at the same time, the spare battery is charging.When AC power shut off, the product automatically switches to battery power supply to keep light on.Emergency time can be 90minutes, 2 hours or customized.
Three function modes for emergency
a> fixture light on only emergency circumstance: when main AC power on, the light on.while the AC power off, the emergency light on and will last for more than 90mins, 2hours or customized.
Note:before you place order, you should confirm which circumstance below you will use this fixture and the way of wiring
Products of different size & specification
A>physicial specification
| dimension | L1268*W152*H100mm |
| weight | 3.7kg |
| tube housing | AL heatsink + PC cover |
| tube socket type | G13 |
| IP rate | IP65/IP44 |
| part number | ZL-T8YJF-4FT-D |
| input voltage | AC200-240V |
| power comsumption | 2*18w |
| lighting source | SMD2835 Epistar LEDs |
| LED quantity | 96*2pcs |
| working temperature | -25-40 |
| lumen flux | 75lm/w |
| lumens | 2600lm |
| color temperature | 2800k-7000k |
| CRI | >80 |
| beam angle | 120 |
| lumen maintenance | >97%@1000hours |
| emergency mode | tube can be single or twin emergency |
Installation:
1. Open the package; take out the accessory metal buckle.
2. Check the fixture and make sure T8 tube and cover clips fixed well , if necessary,open the
cover and check.
3. Tack two plastic studs on the ceiling and Put the metal buckle on the wall with a screw
4. Install the fixture on the wall.
Note: if you don’t need any wire out and connect terminal block in fixture with wires from concrete(eg. make hole in middle fixture,terminal block in middle), please note this requirement in your order.
5. Three ways of wiring, please choose carefully.
6.Turn on the AC power, the tube light on.
Maintance
1. In order to extend lifetime of the product and more safe operation, please keep it clean, maintenance and preserve
2. While cleaning the lamp, please use the soft cloth with soap water and wring it, then try to sweep.
3. Don’t use the volatile chemic liquid such as alcoholic, gasoline or pesticide to sweep, otherwise, easily damage the lamp, thereby affect the lifetime of product.
4. If there are any doubts or problems while you are installing, please contact your supplier or manufacturer
Ø Corridor/Stairs
Ø Washroom
Ø Warehouse
Ø Parking underground
Ø Cookroom/balcony
Ø Schools, Colleges & Universities
Ø Hospitals
packaging
Box:1320 * 140 * 100 mm (1 unit/box)
Carton:1360 * 440 * 230 mm
Gross Weight: 23.9 kg
Net Weight: 22.2 kg
Quantity: 6 pcs/carton
Shipping
1. FedEx/DHL/UPS/TNT for samples, Door-to-Door;
2. By Air or by Sea for batch goods, for FCL; Airport/ Port receiving;
3. Customers specifying freight forwarders or negotiable shipping methods!
Attention
In general: DHL postage >Fedex postage >Airline postage>Sea postage
payment
why choose us?
1.We are Alibaba Assessed 3 years Gold Supplier.
2.We are a factorymanufacturing led indoor lamps,best production capability ,best quality control, Best Service .
3.100% QC inspection Before Shipment.
4. CE/UL/DLC/SAA/C-tick listed,competitive price.
unique selling points
a> our products energy saving comes up to 80%, high intensity.
b> high-grade light quality as well as better heat dissipation.
c> excellent design for the protection of over-charge,over-discharge and none connection.
d> after battery capacity full,automatically switch to energy maintainance state.
e> 5 years warranty makes it perfect for long-time usage.
company view:
About us:
Shenzhen COMLED Electronic Technology CO., Ltd is a professional led lighting manufacturer in Shenzhen, China. We have six years experience in making led lights, focusing on making C-tick, SAA, UL led lightings.
Our Quality:
With years LED LIGHTINGS Technical Experience, We use only the best quality (original) components to ensure the standard of our product range is of the highest caliber.
All products we sold out are strictly selected and tested by our QC department.
All products have approved SAA C-tick certification.
Warranty:
We offer FIVE YEARS warranty for this product(battery packs one year).
Warranty term:
1. Under the terms of this warranty, if the product have a failure occurs under normal usage within warranty period,COMLED will provide free/rework new products based on the proof-documents.
2. If Failure or damage due to incorrect operation, wire connection, or anything other do not follow our instruction,COMLED will provide paid maintance within warranty period.
Q1: what' color temperature?
A1: Comled's LED Lighting offer lamps in warm, natural and cool white with colour temperatures measured in Kelvin (K).The lower the colour temperature is, the warmer the light given by the LED:
Warm white = 2700K-3200K
Natural white = 4000K-4500K
Cool white = 5000K-7000K
Q2: what' CRI?
A2: CRI is a figure which feedback the real objects colors.Higher CRI with higher cost.For LED tubes, the CRI is mostly 75-80 Ra.But there are some suppliers write a high data to attract clients,please note.
Q3: What's your battery lifespan?
A3: 300-500 times of charging or recharging circles.
Q4: How to increase the lumens of LED, without reducing the CRI?
A4: Replace the lamp bracket, which is good in light transmittance.
Q5:why you can provide warranty for 5years,but the battery just 1 year?
A5: During usage, the battery life is attenuation.But we promise our battery lifespan can last for 300-500 times of cycles.
More details, pls contact lisa freely!