Click on the image to view the original image
WS2811 12V RGB addressable led strips
Specification:
5050 smd rgb led strip ws2811
Input voltage :.............DC12v;
Power: .......................7.2watt/meter, 36watt/roll;
LED resource:.............High brightness 5050 RGB;
Q'ty of LED: ...............30leds/meter, 150leds/roll, each 3LEDs separately controlled
IC Type: .....................ws2811 IC;
Q'ty of IC: ...................10IC/meter (1 IC drives 3led chip);
Pixels:..........................10ic/meter;
Grey scale: .................256;
Bits/color: ...................8-bits/color;24bits for RGB color
FPC size: ...................Width: 10mm, High: 2.5mm;
FPC color: ..................White/Black
Protection rate: ..........IP66 in silicon tube
Colors: ........................Full color RGB, dream color changing;
Cuttable:......................Every 3LEDs cuttable;
Package: ....................5meters/reel in anti-static bag.
standard pinout diagram for our pixel lights:
Brown:- 5/12v +
Yellow/green:- earth/ -
Blue:- Data
Input end: male connector(screw end with bare pin)
Output end: female connector(with hole)
Features:
Output port compression 12V.
Built in stabilivolt, Only add a resistance to IC VDD feet when under 24V power supply.
Gray level 256 can be adjusted and scan frequency not less than 400Hz/s.
Built in signal reshaping circuit,after wave resha-ping to the next driver, ensure wave-form distor-tion not accumulate.
Built-in electric reset circuit and power lost resetcircuit.
Cascading port transmission signal by single lin-e.
Any two point the distance more than 10m tran-smission signal without any increasecircuit.
When the refresh rate is 30fps, low speedmodelcascade number are not less than 512 points, hig-h speed mode not less than1024 points.
Send data at speeds of up to 400 Kbps and 800Kbps two patterns.
Images:
