Click on the image to view the original image
Shenzhen factory LiFePO4 Battery 3.2V 100Ah for RV
LFP 3.2V 100Ah battery specification | |
Model | LFP 3.2V 100Ah |
Dimension | 67 x 142 x 215 mm |
Voltage | 3.2V |
Capacity | 100Ah |
Impedance | <2mΩ |
Discharge cut-off voltage | 2.3V |
Maximum Charge voltage | 3.65V |
Standard charge current | 0.2C |
Max working current | 5C |
Charging and charger | CC/CV with professional charger |
Weight | <3300g |
Working temperature | Charge:0-60 degree |
Discharge:-20-55 degree | |
Storage temperature | minus 20 - 55 degree |
Normal temperature capacity | 100Ah |
Cycle life | 1500 cycles with DOD 100% to 80% capacity under normal temperature 2000 times cycle life |
Notice
Do not heat the battery directly or thrown into a fire.
Do not assemble or store in high temperature (over 60 °C) environment
Do not short-circuit the battery directly.
Do not use acid corrosion of the battery casing.
Do not throw it into water or put in wet environment.
Do not knock, impact the battery.
Do not anatomy cell or change the internal structure of the battery.
Advantage:
1.Long life, large capacity and good shock resistance
2.Low self-discharge and good discharge performance at low temperature
3.Strong charging acceptance and quick-charging capability
4.Strong over-discharge resistance and charge retention
5.Maintenance-free and no acid or water for maintenance in usage
6.Excellent large current discharge performance, and have obvious advantages in startup and climbing
7. High temperature performance
8. Environmental friendly
9. Lighter weight smaller size
10.Most safe no explosion no fire
BMS:
Our BMS consists of Master BMS Circuitry (we named “BMU”), Slave BMS Circuitry (we integrate it into our battery module) and contactor.
Besides the basic functions such as over charge/ discharge, over current, short circuit, over temperature and balancing, Our BMS owns the following features,
1. Master-Slave architecture makes the system flexible;
2. Two level warning makes maintenance easier;
3. CAN2.0 and industrial level electronic components make system reliable;
4. Contactor makes high rate charge & discharge feasible;
5. Periodic insulation measurement makes personnel safety possible;
6. Host can control the system easily;
.
Business Process :
Certificates :
Business Office :
Shipping :