Shenzhen Feican Technology Co., Limited

led tape light smd2835 multi color RGB IP65 waterproof

strips+power supply+24keys remote controller complete set/kit

remote IR 24 Keys RGB LED controller control led strip Summarization :  

24-key infrared LED RGB controller adopts the advanced micro control unit, it is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, wall washer lamp, glass curtain wall light and so on; At the same time, it has many advantages such as convenient connection ,simplicity to use and others. According to the actual need of customers, it can carry out jumpy changing, gradual changing and other effects of change. Total 24 modes for your choice.

2014new remote IR 24 Keys RGB LED controller control led light Technical parameters :

Working temperature: -20-60 °C

Voltage supply: 12V

Output: 3 channels

Connecting mode: common anode

Function model:20 models.

Static power consumption: <0.5 W

Output current: <2 A (each channel)

Output power: <72W

Connecting:12V 3528LED strips 10meter 60LEDS/Meter

5meters 60LEDS/Meter

12V 9 lamp module 100groups

about led controller control led strip Remote control dimension :

remote IR 24 Keys RGB LED controller control led strip Direction for use :

1.Connect the load wire at first, following by the power wire; Please ensure short circuit can’t occur between connecting wire before you turn on the power;

2.Standard color changes as follows :

new remote IR 24 Keys RGB LED controller control led strip Direction : 1.When switching to dynamic modes the button of “Brightness +”/ “Brightness -” means the speed of light change is up/ down, there are 100 step in all.

2.The FADE and SMOOTH all have two modes, which are “3 base colors jumpy/7 colors jumpy” and “3 base colors fade/7 colors fade”, you can press one more time to change it.

3.when press FADE and SMOOTH, the “FLASH” and “STROBE” key are invalid.

4.When in the static modes, press the “FLASH” /“STROBE” key, the mode will change to be “ the single color Stroboflash/ Gradual changing”.

remote IR 24 Keys RGB LED controller control led strip Key instruction :

3528 LED Strip Light:

Item Type:Strip

Average Life (hrs):50000

Waterproof:Yes

LED Chip Model:SMD3528

Voltage:12V

Power Source:DC

Strip type:SMD

Specifications (light beads / m):54leds/m

Power Consumption (W/m):4.8W/m

Power Adapter:

Input:AC110-220V

Output:DC12V

Power:2A 24W   

 Remarks:

1, Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;

2, Power supply voltage range is DC12~24V, more than voltage range maybe will burnout the controller.

3, Touch remote when not use for a long time, suggest to take down the battery.