Click on the image to view the original image
Square LED bulkhead light
OPTIONS
• 3 hour Maintained emergency with Ni-MH battery pack
• Microwave motion sensor
• Changeable Colour 4000K, 5000K and 6000K (NEW)
• Battery auto test for emergency version
Technical Specifications:
Parameters / Model | GL2003series | GL5030series | ||||
Model | 20W | 40W | 50W | |||
Size | 315 x 315x 99mm | 420 x 280x 100mm | 420 x 280x 100mm | |||
Power | 20W | 40W | 50W | |||
Input Voltage | AC100-240V 50/60Hz | |||||
PF | >0.9 | |||||
LED Type | SMD2835/3030 LED Chips | |||||
Lumen output | 2100Lm | 4000Lm | 4900Lm | |||
CCT colour options | 3000K / 4000K / 5000K / 6000K | |||||
CRI | >80 | |||||
Beam Angle | 110° | |||||
IP Rating | IP65 | |||||
Luminous Efficiency | 100Lm/W | |||||
Operating Temperature | -10°C to 50°C | |||||
Lifespan as per LM80 | 50000 hours | |||||
Base and diffuser | Die-cast aluminium base +PC diffuser, IK10 | |||||
Driver Output Voltage | DC 36V | |||||
Driver Output Current | 500mA ± 10mA | 1000mA± 10mA | 1200mA ± 10mA | |||
Warranty | 5Years | |||||
Optional Emergency (maintained):
Battery type | Rechargeable Heat resisting 9.6V 1200/2200mAh Ni-MH |
Emergency Output | 2 to 4 Watt |
Emergency Duration | >3 Hours |
Charge Time | Less than12 Hours when fully discharged |
LED Emergency indicator | Red: charging , Green: fully charged, Yellow: faulty or disconnected. Green flash: auto test, Red flash: discharging(emergency mode) |
Test Button | Push and hold the button to test the emergency mode; release button to go back to AC power mode |
Microwave sensor technical specification
Input Voltage: 12V DC
Output Voltage: 5V DC
HF System: 5.8GHz, ISM wave band
Transmitting Power: 0.5mW
Detection Area: 1 ~ 8m
Detection Angle: 360
Power Consumption: Approximately 0.9W
Hold Time: 10 seconds ~ 5 minutes
Lux Level: 10lux, 20lux, 50lux, 100lux, 200lux, 300lux, 500lux
Standby dimming level: 0%, 25%
Operation Conditions: -10deg to 50deg
Installation: Mounting inside a fitting