Shenzhen Getian Opto-Electronics Co., Ltd.

professional uvc manufacturer 3535/6868 275nm uv led high intensity 6-100mW

Product Features:

Germicidal 3535 UVC 275nm LEDs 

• 3535 Compact, Slim Size, Light-weight SMD PKG
• 40mA 50mA 5-7V 275nm 310nm for option
• Radiant Power: 2-4mW;6-8mW 
• ALN Ceramic base, quartz glass cover
• Low power comsumption, low thermal resistance
• Lifespan: 50% aging after 10000hours.

What is deep ultraviolet LED?

The emerging deep ultraviolet light source uses the principle of LED, which is called deep ultraviolet LED.

The new deep ultraviolet LED has many advantages over the traditional mercury lamp ultraviolet light source.

First of all, the deep ultraviolet LED has a simple structure, does not contain a fragile glass shell, is portable and shock-resistant, has an operating voltage of only a few volts, and does not require a complicated driving circuit.

Secondly, the deep ultraviolet LED is turned on quickly without preheating, which is very suitable for rapid detection, high-speed communication and other applications.

Compared with the characteristic of multi-line luminescence of traditional mercury lamps, the deep ultraviolet LED has a single luminous peak, and the luminous wavelength is continuously adjustable. In terms of environmental protection and energy saving, DUV LED materials do not contain harmful substances to the environment, and are environmentally friendly.

At the same time, DUV LEDs can save up to 70% of energy compared with traditional UV light sources, and comply with the European Union's hazardous substance restrictions (RoHS standard). Finally, the life span of deep ultraviolet LEDs has reached more than 5,000 hours, exceeding the life span of mercury lamps.

Product Specification:

 
Product Application:


 

Purification/Disinfection/Sterilization (water, healthcare, food, air)

Water: water treatment, water quality monitoring, ultrapure water geneation, drinking water disinfection

Air: Aire quality, Infectious disease control

Food: Food Processing, Sterilization in home aplliances

Heathcare: Sterilization, Medical Instrumentation Disinfection, Phototherapy, Fluorescent Spectroscopy, Sensor Light Bio-Analysis / Detection, Counterfeit Detectors, etc

Ink Curing

Anti-Counterfeiting

Sensor System

Mosquito-trapping

Nail Curing

Fluorescence Detection

Analytical instruments

 Cases:

From environmental appliance to personal care... and more

:Adopt 3535 package 2mW UVC LED, small size, easy to travel and carry, can be hung on the wall in the bathroom at home. Low energy consumption, simple operation, the lid works automatically. Work three minutes after closing the cover (new battery can work 60 times), the sterilization efficiency is 99% .

:Used: 1pcs 2-4mW model

:Product effect: 99% sterilization rate

:Before the atomization of the Chimi sterilization humidifier, the DNA chain in the bacteria body is destroyed by uvc light, which can kill the bacteria in the water and release clean and humid air.

:Used: 1pcs 2-4mW model

:Product effect: 99% sterilization rate

...etc

Product Dimension:

Spectral Features:

Electrical Features:

Relative Power VS Current:

Typical Spatial Distribution:

 During Usage:

• The LED should avoid direct contact with hazardous materials such as sulfur, chlorine, phthalate, etc.
• The metal parts on the LED can rust when exposed to corrosive gases. Therefore, exposure to corrosive gases must be avoided during operation and storage.
• The silver-plated metal parts also can be affected not only by the corrosive gases emitted inside of the end-products but by the gases penetrated from outside environment.
• Extreme environments such as sudden ambient temperature changes or high humidity that can cause condensation must be avoided.

Human Body Protection:

• All assembly workers, observers and bystanders must wear eye and skin protection when the UVC LEDs are energized. Bare eye observation (including through microscopes) and bare-hand handling of a UVC LED in operation is PROHIBITED.
• UVC light can be easily absorbed, so any oil or other absorbent liquid must NOT be allowed to touch the sapphire side of the UVC chip.