 Product Category
Search Link
|
Home > Products > IP65 Waterproof Outdoor LED Garden Lights ZigBee 3.0 Compliant Non Solar Gutter Lights Amazon No Battery Powered Outdoor Lights
IP65 Waterproof Outdoor LED Garden Lights ZigBee 3.0 Compliant Non Solar Gutter Lights Amazon No Battery Powered Outdoor Lights
Product Details Specification 
Product Description Lighting Effect of ZigBee Smart Control RGB+CCT LED Spike Light> Switch between multiple lighting modes at will
ZigBee3.0 Light Link Hue ProtocolGledopto Zigbee LED Lamp and Controller directly work with HUE, Amazon Echo Plus, Samsung Smartthings, Osram Lightify, Homee, Google home & all other alexa devices. Integrate voice control by pairing an Amazon Echo or Google Home smart speaker to your compatible ZigBee hub. Enjoy the benefits of hands free lighting control by asking to turn the lights on and off, dim, adjust the color temperature, and more.
ZigBee Xbee Color Light Features● 16 million colors and saturation change, to adjust your favourite lighting color ● Adjust warm white to cool white color temperature from 2700K to 6500K, to help you relax, optimize productivity, or create a more charming environment ● Brightness adjustable, to dim the lighting brightness according to your different use, dimmable from 1% - 100% ● Color Sync, to make the lighting color of ZigBee Hue Controlled Outdoor LED Floodlights synchronize with the screen color of your TV and competurer games, etc. Smart Lighting SimplifiedBuilding a smart home has never been easier with GLEDOPTO® SMART CONTROLLED LED LAMPS. Using a compatible ZigBee smart hub, you can easily connect and start controlling your lights in just a few simple steps. Make Your Smart Lights Work For You Have you ever left a light on when leaving the house? Or wished the lights would turn on while you're on vacation or coming home late from work? Using your smartphone, you can monitor and control your lights from almost anywhere. Change color temperature, turn lights on and off, dim, and create schedules and automations to make your lights work for your personal needs. To Control Gledopto PLUS w/o a ZigBee Hub >The Plus series is ZigBee + Radio Frequency controlling design. >These are great if you want to control your lights with just the remote or without the ZigBee hub. Sometimes you don't want to use the App to turn on the lights, the remote or the wall mounted controller can do it much easily. >Or if you are putting these lights somewhere out of the WiFi coverage, e.g. a camper, backyard, garage workshop, etc., you can use the RF Remote Controller directly, no need to find to link to a ZigBee bridge. >Auto sync & transfer. The best feature for 2.4GHZ RF Remote Controlling, it's most fit for long distance & large area lighting. Your RGBW/RGB+CCT LED lights can receive the controlling signal from the remote or wall controller, as long as the distance between two lamps is within 15-20mtr, the 1st lamp can send the signal automatically to the 2nd lamp, and then to 3rd one, etc., until all lamps totally synced and changing the lighting color all the same at the same time. This wireless controlling design will save huge labour job and cost. ZigBee Bridge Control Settings Installation:When paired with a ZigBee smart hub such as SmartThings, Wink, or Echo Plus, setting up your device is quick and easy. 1.Turn off the Power. Connection with Gateway1. Start the device searching on the ZigBee Light Link Gateway, it could take some time. If the Gateway does not find the device, switch off/on the hue bridge again Reset1. Switch on your device. 2.4G RF Remote Controlling Setting (w/o ZigBee Hub) Link & unlink with 2.4GHZ RF Remote Control> How to Link1. Within 3 seconds after power on, click the "on" button of the group to conduct code matching, and the LED lights turns green, indicating successful code matching. 2. Long press the "off" button of the remote control to enter the night light mode, and the brightness and color can still be adjusted at this time. 3. Long press the small moon key to enter the 60 seconds delay shutdown state. 4. Long press M key to enter automatic mode. > How to unlink 1. If the LED is still connected to the ZigBee gateway, long press the "on" button on the remote control within 3 seconds after power on or press the button for 5 times continuously, the light will flash for 5 times in the current color. 2. If the LED is not connected to the ZigBee gateway status, lon gpress the "on" button on the remote control within 3 seconds after power on or press the button for 5 times continuously, then the LED light will be fully bright and flashing for 5 times. Different Modes DescriptionMode 1: Static warm white color (warm white color only) Mode 2: Static white color (cold and warm white color are equally bright) Mode 3: Static cold white color (cold white color only) Mode 4: Static red color Mode 5: Static green color Mode 6: Static blue color Mode 7: RGB fade in and out (from red --> green --> blue --> red, and so on, speed adjustable) Mode 8: RGB flashing (from red --> green --> blue --> red, and so on, speed adjustable) Mode 9: Color breathing (On this mode, the brightness of current color will cycle from 100% to 0%, then from 0% to 100%. At the same time, you can switch the color and have a cycle repeatedly. Pressing switch/mode button to exit this mode) More Features & Lighting Application Certifications Company Information FAQs Q1. Can I have a sample order for led light?A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable. Q2. What about the lead time?A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than 1000pcs Q3. Do you have any MOQ limit for led light order?A: Low MOQ, 1pc for sample checking is available Q4. How do you ship the goods and how long does it take to arrive?A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional. Q5. How to proceed an order for led light?A: Firstly, please let us know your requirements or application. Fifthly, customers make balance payment for the order, and we arrange shipment once the payment received. Q6. Is it OK to print my logo on led light product?A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample. Q7: Do you offer guarantee for the products?A: Yes, we offer 2-3 years warranty for our products. Q8: How to deal with the faulty?A: Firstly, our products are produced in strict quality control system and the defective rate will be less than 0.2%. For large defective products, we can arrange to repair them and resend them to you, or we can discuss the solution including re-call according to actual situation. total0items Comments |
|||||||||||||||||||||||||||||||||||||||
Click on the image to view the original image