Click on the image to view the original image
Brand new and high quality PIR sensor switch
Suitable for automatic lighting in aisle, corridor, bathroom, basement, warehouse, garage and other places, automatic ventilation of ehaust fan and other electrical automatic control functions, as well as can be used for security purposes.
Model: RK-S68BD
Product size: 65 50 30mm
Operating voltage: AC185-240V(50Hz/60Hz)
Load power: 1000W
Own power: 0.026W/h
Load capacity: inductive load 500W, resistive load 1000W
Induction method: passive
Induction principle: Human Infrared
Sensing distance: 4-8 meters
Induction angle: 140 degrees cone angle
Load Range: All kinds of loads
Light control induction: 5LU-500LU (adjustable)
Ambient temperature: -20 Celsius - + 50 Celsius
Suitable for automatic lighting in aisle, corridor, bathroom, basement, warehouse, garage and other places, automatic ventilation of ehaust fan and other electrical automatic control functions, as well as can be used for security purposes.
Two locators:
105 photosensitive adjusting ( factory setting is clockwise adjusting to the end, the mode is that it does not work until nightfall coming. Therefore, the sensor switch will automatically flash several times and then go into standby state after installation in daytime. If you want the switch to work at daytime as well, you can anticlockwise adjust the 105 photosensitive locator for 15-30 degrees. In this way, the switch can work both daytime and night. )
204 delay time adjusting ( factory setting is clockwise adjusting to the end, the delay time is about 16 seconds. If you want to prolong the delay time, please anticlockwise adjust the 204 delay time locator 180 degrees for maimum 180 seconds or so. ) Do not hot-line work. Power it after finishing adjustment and covering the lid!
1 PIR switch
3 Accessories
1 English user manual
Packed in paper bo
Suitable for automatic lighting in aisle, corridor, bathroom, basement, warehouse, garage and other places, automatic ventilation of ehaust fan and other electrical automatic control functions, as well as can be used for security purposes.
Model: RK-S68BD
Product size: 65 50 30mm
Operating voltage: AC185-240V(50Hz/60Hz)
Load power: 1000W
Own power: 0.026W/h
Load capacity: inductive load 500W, resistive load 1000W
Induction method: passive
Induction principle: Human Infrared
Sensing distance: 4-8 meters
Induction angle: 140 degrees cone angle
Load Range: All kinds of loads
Light control induction: 5LU-500LU (adjustable)
Ambient temperature: -20 Celsius - + 50 Celsius
Suitable for automatic lighting in aisle, corridor, bathroom, basement, warehouse, garage and other places, automatic ventilation of ehaust fan and other electrical automatic control functions, as well as can be used for security purposes.
Two locators:
105 photosensitive adjusting ( factory setting is clockwise adjusting to the end, the mode is that it does not work until nightfall coming. Therefore, the sensor switch will automatically flash several times and then go into standby state after installation in daytime. If you want the switch to work at daytime as well, you can anticlockwise adjust the 105 photosensitive locator for 15-30 degrees. In this way, the switch can work both daytime and night. )
204 delay time adjusting ( factory setting is clockwise adjusting to the end, the delay time is about 16 seconds. If you want to prolong the delay time, please anticlockwise adjust the 204 delay time locator 180 degrees for maimum 180 seconds or so. ) Do not hot-line work. Power it after finishing adjustment and covering the lid!
1 PIR switch
3 Accessories
1 English user manual
Packed in paper bo
