- Place of Origin:
- Guangdong, China
- Brand Name:
- Asenware
- Model Number:
- AW-CSD812
- Product name:
- Conventional smoke & heat detector
- Model:
- AW-CSD812
- Warranty:
- 1 year
- Operating voltage:
- 24V
- Alarm SPL:
- ≥80dB
- Flash:
- Red 1Hz
- Supply Ability:
- 5000 Piece/Pieces per Month
- Packaging Details
- 1.Ship by express,by air,by sea and son on.
2.Packed with foam bag and export caron
3.Lead time:3-5 days
- Port
- Zhongshan
2 wire multi smoke and heat detector for factory
1. GENERAL DESCRIPTION
The detectors are photo-electronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.
Two LEDs on each detector provide local 360° visible alarm indication. They flash every six seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption.
The detector that initiated the alarm condition will have its red LED and relays latched until reset by panel. Heat detector and smoke & heat detector combine a photo electronic sensing chamber and a temperature heat detector.
Parameters
Operating Voltage Range | 9 to 28 VDC Volts Non-polarized |
Standby Current | ≤120μ A@24VDC |
Maximum Alarm Current (LED on) | ≤15mA@24VDC |
Operating Humidity Range | ≤95%RH(40°C±2°C) Relative Humidity, Non-condensing |
Operating Temperature Range | -10° C to 50° C (14° F to 122° F) |
Smoke Alarm Sensitivity | 1.06± .26%FT |
Fix temperature Alarm | 57° C (135° F) A1R |
Rate of rise Alarm | 7.1° C/5S A1R |
Height | 48.2 mm installed in Base |
Diameter | 99.45 mm |
Asenware, is the fire alarm system and fire suppression system manufacturer and whole fire safety solution provider since 2005
Our fire safety products, solutions and services are used in over 100 countries.
With over 200 employees work in United Kingdom-Marketing center, China-R&D and Supply Chain center and Bangladesh-Manufacture center, Asenware is committed to design and manufacturer the best fire safety products to reduce the risk of fire, and support the world to be more safe and more comfortable.
Product range
Addressable fire alarm system
Conventional fire alarm system (2166 series)
FM200 gas suppression system (2159 series)
Fire pump
Fire hose/ hose reel and cabinet
ABC powder/ CO2 fire extinguisher
Emergency light system
1)Sample oder is welcomed to test the quality.
2 ) Flexible technicals adjusting as per customer" s special request.
3) Answer your enquiries, questions and emails in 24 hours
4) Direct control on material, testing, quality, leadtime etc.
1.Ship by express,by air,by sea and son on.
2.Packed with foam bag and export caron
3.Lead time:3-5 days
1)Sample oder is welcomed to test the quality.
2 ) Flexible technicals adjusting as per customer" s special request.
3) Answer your enquiries, questions and emails in 24 hours
4) Direct control on material, testing, quality, leadtime etc.