Click on the image to view the original image
Fire alarm control panel 1-32 zones with OEM/ODM
Each zone has one circuits detectors input. Each zone can be disable by button.
It has reset button to reset the panel. It has silence buttom to stop buzzer and sounder. It has evacuate button to start manual fire alarm immediately. It has battery low protection function. When battery voltage lower than 21 VDC. Battery will be cut off automatically until main power is on
It has an option GSM module for fire alarm system by sms. It is friendly economic and easy installaion.
ITEM | 1Zone panel | 2Zone panel | 4-8Zone panel | 4-32 Zone panel |
Model No.
| AW-CFP2166-01
| AW-CFP2166-02
| AW-CFP2166-04-8
| AW-CFP2166-04-32
|
Power specification
|
| |||
Mains supply voltage
| 110VAC or 240VAC
| |||
Internal power supply
| 27.2VDC
| |||
Total output current limited
| 500mA @240VAC
| 500mA @240VAC
| 3A @ 240VAC
| 3A @ 240VAC
|
Main supply monitor for fault
| Yes
| |||
Battery protection for low voltage
| Yes
| |||
Batteries (default configuration)
| 12V2AH*2
| |||
Detector circuit specification
|
| |||
Number of circuit
| 1
| 2
| 4-8
| 4-32
|
Line fault monitor for open circuit
| Yes
| |||
Line fault monitor for short circuit
| Yes
| |||
Line fault monitor for detector removal
| Yes, if End of Line Monitor Unit fitted in place of End of Line Resistor
| |||
End of Line device
| 6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,gold)
| |||
Detector continuity diodes
| Silicon 1N4001 or Schottky type (required if End of Line Monitor Unit fitted to give Detector Removal Fault)
| |||
Call point resistor value
| 470 to 680 Ω, 0.225 or 0.5 watt
| |||
Maximum number of smoke/heat detectors per zone
| 20 (based on a total detector current of 2mA, each detector consuming 100μA).Note: if End of Line Monitor Unit is fitted, for correct operation maxmum voltage drop must not exceed 12 volts.
| |||
Maximum number of manual call points per zone
| No limit
| |||
Sounder circuit specification
|
| |||
Number of general circuits
| 2
| |||
End of line resistor value
| 6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,gold)
| |||
Line fault monitor for open circuit
| Yes
| |||
Line fault monitor for short circuit
| Yes
| |||
Outputs fused AT
| 400mA
| |||
Maximum number of bells @ 20mA of each sounder output
| 20
| |||
Fuses
|
| |||
27VDC fuse
| 3A F 20mm
| |||
Fire and fault output
|
| |||
Output type
| Dry relay output :NC and NO relay; wet source output
| |||
Maximum current
| 100mA
| |||
Connection block
|
| |||
Largest acceptable conductor size
| 2.5mm2
| |||
Smallest acceptable conductor size
| 0.75mm2
| |||
Size and weight
|
|
| ||
Dimensions(mm)
| 272*200*70mm
| 320*231*90mm
| 395X502X124
| 362X565X124
|
Weight (without batteries)
| 4kg
| 5kg
| 7kg
| 8kg
|
Weight (with batteries)
| 5.8kg
| 6.8kg
| 9.6kg
| 12.5kg
|
Coventional Fire Alarm Control Panel Introduction
|
1.AW-CFP2166 series conventional fire alarm control panel is designed based on EN54 part 2&4 standard. |
2.It is modularized design, the panel can expend from 1 zone to 32 zones easily. |
3.It has 2 level control mode by a lock |
4.It has 24VDC and 5VDC power supply output. |
5.It has FIRE and FAULT signal output. |
6.It has 2 general sounders output. |
7.Each zone has 1 circuit detectors input . |
8.Each zone can be disable by a button. |
9.It has reset button to reset the panel. |
10. It has SILENCE button to stop BUZZER and SOUNDERS. |
11.It has EVACUATE button to start a manual fire alarm immediately. |
12.It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on. |
13.It has an optional GSM module for fire alarm by SMS . |
14.It is economic, user-friendly and easy maintenance. |
- Packaging Details -Standard safety export package / carton (Box + Foam) or as customized
- Delivery Time -One week
1.Conventional fire alarm panel free technical support | |
2.Conventional fire alarm panel after sale service | |
3.Conventional fire alarm panel OEM/ODM | |
4.Conventional fire alarm panel 1 year warranty | |
Asenware, manufacturer of fire alarm and fire suppression system since 2005. Our headquarter is in London, UK, with factory Shenzhen, China
We keep our best service for our customers, and have a rich experienced engineer team to design and install for overseas projects.
FEW of OUR RECENT FINISHED PROJECTS :
• Indonesia: Government Apartment ( Addressable and Telephone Panel)
• Cambodia: Coal Plant ( FM-200, LPCO2 System, Addressable Panel )
• Kenya: Senior High School ( Addressable and Conventional Panel)
• Bangladesh: Industrial Building ( Addressable Panel )
• Thailand: Ware House ( Addressable Panel with Beam Detectors )
• Laos: Telecommunication Center ( FM-200, Addressable Panel )
• Myanmar: Data Center ( FM-200, Addressable Panel )
1.Our company is a professional fire alarm system & relevant accessories manufacturer in China for many years.With updated machinery and skilled staffs we have supplied stable high quality products to customers all over the world.
2.Our experianced engineers and exporting team will answer your inquiry or email at the first time,and providing professional service from products visiting,ordering to deliver goods and after-sales service.
3.In the same time, we also can provide professional technical solutions for you item even can arrive your country.The aim is to saving your precious time and cost.
Payment terms :T/T L/C Western union .
Delievry time :usually about 2 to 5 days .Mass product about three weeks .
Warranty :one year
Certificate :CE , ISO9001
Technical support :yes
Some Sample
Why choose Asenware?
1.We have more than 10 years experiences in this field.
2.Our professional engineers are always engaging in developing new technology.
3.Meet customer demand is our consistent aim.
4.Our products are economic, user-friendly and easy maintenance.
5.Our all products shipped after testing by laboratories.
Exhibition :
Contact us:
ShenZhen Asenware Test & Control Technology Co. Ltd
Asif Jahangir
Skype: sales24@asenware
Facebook : jahangirasenware
TradeManager: cn1521151149xjrk
Wechat – Asif Jahangir
LinkedIn – Asif Jahangir
QQ-- Asif ( 3577292278 )
Address (China ) :701, Bd 8, Dongfangming Industry Zone, Dabao Rd., Baoan, Shenzhen, China, Zip Code :518101
Address ( UK ) : 6 Prospect Way, Royal Oak Industrial Estate Daventry,
Northamptonshire, England, Nn118pl
Phone number: +86(0) 0755-27663815,
Mobile No- 01715792114
Company website: http://www.asenware.com
If You Have Any Problems or Inquiry ,Feel Free to Contact us to Right Now !!