Shenzhen Hofo Technology Co., Limited

Material

Die-casting Aluminum lamp body,excellent heat dissipation

Plastic cover, high impact resistance, IK10 approval

304 Stainless steel hexagon socket head cap screws

Silicone waterproof gasket to prevent water into the lamp

LED Chip and Driver

We use Taiwan high lumens Epistar Chip
Lumen:80LM/W  CRI> 83

High quality driver, CE RoHS approval
Power factor> 0.93, no flicker, IP66
Mean-Well or Non-mean well driver is available for customer choose base on order request

UGR , SDCM value,Temperature test

UGR < 19

SDCM value of the led that we use (Mac AdamEllips - binning) <3 or 5

Temperature test is 47-49 degree

Cable (GLOW WIRE): VDE, IEC approval

Sensor Function

Built-in Motion Sensor available

Detection area can be adjust from 2m to 10m

Hold time 5s, 30s,90s,3mins,20mins,30min base on request

Daylight sensor detected regardless of ambient light level.
50lux, 25lux, 10lux, 2lux: darkness operation only.

Emergency Function

with main power 220-240V, we offer 15W and 20W

When power cut off, with emergency power 8W , runningtime: 3-4 hours.

Charge time: 12-16 Hours, when indicator of charger on red is charging,off means full charged.

Bathroom, Kitchen, Toilet, Corridor, School, Living room, Bedroom, Spa room, Hotel

Hospital, Meeting room, Showcase, Warehouse, Office, Supermarket, Department store

Payment

Payment T/T , L/C , Paypal , Western Union
Small order is 100%, for large amount,30% down payment, 70% balance before shipping

Shipping

Delivery time: Sample in 3- 5 working days, large order 7-15 working days
By express DHL,UPS,FedEx,TNE, by Airfreight,by Sea

Certification

We got the license of ISO9001:2008, all products has pass CE, RoHS, SAA approval etc.

High production capacity

We facilitates a production capacity
of above 8,000pcs LED High Bay,
20,000 LED emergency Light /month,
50,000 meters/day led strip

Professional Test Machines

Hofo own the professional advanced production and testing machines, standard testing laboratory for testing driver,led lamp,led chip before shipping

Q1. Can I get a sample of led emergency light for testing quality?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A:Sample needs 3-5 days, mass production time needs 7-15 days

Q3. How do you ship the goods and how long does it take to arrive?

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional..

Q4. How to proceed an order for led light?

A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements and make PI
Thirdly customer confirms the details and arrange payemnt for order.
Fourthly We arrange the production and then inform customer to delivery goods.

Q5. Is it OK to print my logo on led light product?

A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q6: Do you offer guarantee for the products?

A: Yes, we offer 2-5 years warranty to our products.

Q7: How to deal with the faulty?

A:  Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, customers need to offer pictures or video to confirm the problems first
Thirdly,during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.