Click on the image to view the original image
Material: Glass (coverd with a pc film)
| Model | Power | Size | Base | Beam angle | Color |
| LED-T8-0.6M | 9W | 588*26mm | G13 | 330 | 3000-6500K |
| LED-T8-1.2M | 18W | 1198*26mm | G13 | 330 | 3000-6500K |
Feature:
1.Beam angle 330 degree.
2.The material of tube is glass, transmission of light is better.
3.There is explorsion-proof membrane around the surface ,which makes the light softer. It is broken inside , will not hurt us.More safter.
Caution:
*Please read and follow these instruction before installation;
*Install the tube by qualified electrician and technician;
*Consult the competent electrician if you have any uncertainty about the installation or the use of product;
*Do not impact the tube and all its components by any external weight or mechanical force;
*Do not use sharp tools near or on the surface of the tube;
*Hands must be dry during installation;
*Switch off the power before installation;
*Make sure the base is mounted on a stable even and secure surface.
*Beware of electric shock when replacing tube.
*Use or store the tubes in dry places ,if the tube are used for outdoor application, waterproof holders and covers are
needed.
*Replace the tube immediately if you find any leakage or damage on the tube;
*Stop use and replace if the product becomes dim,out of order or being to blink;
*If failure occurs do not attempt to repair product;
*This is not dimmable product ,do not use with dimmers.
The installation of LED tube light :
1. New installing :
√ connect the wires as shown in diagram A.
2. With inductance ballast or electronic ballast
√ Take off the fluorescent tube;
√ Cut the wire as shown on the dotted line of the diagram B;
√ Bypass the ballast and remove the starter ( if any ) within the bracket;
√ Reconnect the wires as shown diagram B;
√ Install the LED tube light on the bracket.
3.With fuse:
Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample tube 8tube 8 needs 3-5 days, mass production time needs 35days.
Q3. Do you have any MOQ limit for led light order?
A: 1pc tube 8tube 8 for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 2 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution i ncluding re-call according to real situation.
Contact Person:Tina Tong
Trade manager ID:homeh
Call:one eight one seven zero two six five five one nine
I am of service at any time!