Click on the image to view the original image
Product Description
Model No. | HYZM-SMD2835R6-1S |
Lumens | 6-9lm |
Power | 0.2W |
WLD | 620-630nm |
Chip Size | 12*12 mil |
Applications | 1,LED Lighting industry(Tube,Panel Light,Ceiling Light,Bulb light etc) 2,Landscape lighting (LED Strip,Wall washer lamp,Garden light etc) 3,Plant grow Lamp 4,Sterilization and Disinfection 5,Money detector |
Dimension
Optical characteristics
(1) Absolute Maximum Ratings (TA=25±5ºC)
Item | Absolute Maximum Rating | Unit |
Forward Current | 60 | mA |
Pulse Forward Current | 90 | mA |
Reverse Voltage | 5 | V |
Power Dissipation | 300 | mW |
Soldering Temperature | Reflow Soldering: 260ºC Hand Soldering : 300ºC | for 10sec. for 3sec |
IFP Conditions : 1/10 Duty Cycle, 0.1 msec Pulse Width.
(2)Initial Electrical/Optical Characteristics (TA=25±5ºC)
(2)Initial Electrical/Optical Characteristics (TA=25±5ºC)
Item | Units | Min. | Typ. | Max | Test Conditions |
Forward Voltage | V | 2.0 | 2.2 | 2.4 | IF=60mA |
Reverse Current | uA | - | - | 5 | VR=5V |
Viewing Angle | º | - | 120º | - | IF=60mA |
Luminous flux | lm | 6 | 9 | IF=60mA | |
Dominant wavelength | nm | 620 | 625 | 630 | IF=60mA |
Production Process
Die bonding
Wire bonding
Molding
Sorting
Taping
Vacuum packaging
Detailed Images
original factory formal chip
99.99% gold wire
red coper holder
high refractive index silicone
Application
Company Introduction
SHENZHEN HUANYU DREAM TECHNOLOGY CO.,LTD is part of the HK HUANYU DREAM TECHNOLOGY CO.,LTD. Established in 2011,located on the New Guangming of Shenzhen, office covering area 1,000㎡,Factory area 3600㎡.
Mainly specializes in manufacturing world-class SMD LED and High power LED,Such as 2835 5730 5050 3030 3528 etc. Now with a high level dust-free anti-static workshop, 36 units D/B machines, 36 units W/B machines, 20 units splitting/Sorting machine, 20 units typing machine, product capacity 400KK/mon, export to all over the world.
Certification
Cautions
(1)Soldering Conditions
Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and Second soldering process.(Recommended soldering conditions)
(2)Static Electricity
It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs.All devices, equipment and machinery must be properly grounded. Damaged LEDs will show some unusual characteristics such as the forward voltage becomes lower, or the LEDs do not light at the low current. Criteria : (VF > 2.0V at IF=0.5mA)
(3) Moisture Proof Package
It is recommended that moisture proof package be used .
(4) Storage
Before opening the package ,The LEDs should be kept at 30°C or less and 70%RH or less. The LEDs should be used within a year.
(5)After opening the package, The LEDs should be soldered within 24 hours (1days) afteropening the package.
(6) cautions
6.1.Please check if there is air leak before opening the package, if so, please return the goods back to take drying process for later using.
6.2Products can be used within 15days after packaging, after that, they must be:Soldered within 24 hrs;Used in the condition: 30℃ within and 60%RH below;Stored in 30%RH for moisture below.
6.3.Products cannot be used for and over 30days after being packaged unless opening the package and take drying our process in 85 ℃/12H.
6.4.Products not be used for or over 60days after being packaged please return back to take drying out and packaging process for forward using.
6.5.Products not be used after opening the package need to be dried out for 70℃/8H
Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and Second soldering process.(Recommended soldering conditions)
(2)Static Electricity
It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs.All devices, equipment and machinery must be properly grounded. Damaged LEDs will show some unusual characteristics such as the forward voltage becomes lower, or the LEDs do not light at the low current. Criteria : (VF > 2.0V at IF=0.5mA)
(3) Moisture Proof Package
It is recommended that moisture proof package be used .
(4) Storage
Before opening the package ,The LEDs should be kept at 30°C or less and 70%RH or less. The LEDs should be used within a year.
(5)After opening the package, The LEDs should be soldered within 24 hours (1days) afteropening the package.
(6) cautions
6.1.Please check if there is air leak before opening the package, if so, please return the goods back to take drying process for later using.
6.2Products can be used within 15days after packaging, after that, they must be:Soldered within 24 hrs;Used in the condition: 30℃ within and 60%RH below;Stored in 30%RH for moisture below.
6.3.Products cannot be used for and over 30days after being packaged unless opening the package and take drying our process in 85 ℃/12H.
6.4.Products not be used for or over 60days after being packaged please return back to take drying out and packaging process for forward using.
6.5.Products not be used after opening the package need to be dried out for 70℃/8H
FAQ
Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 1-3 days, mass production time needs 3-7 days for order quantity more than 100000pcs
Q3. Do you have any MOQ limit for led light order?What's the Payment way ?
A: MOQ is 100pcs for each model. We accept T/T Paypal and Western Union three ways payment.
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 2-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Q6. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 3 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 1-3 days, mass production time needs 3-7 days for order quantity more than 100000pcs
Q3. Do you have any MOQ limit for led light order?What's the Payment way ?
A: MOQ is 100pcs for each model. We accept T/T Paypal and Western Union three ways payment.
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 2-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 3 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.