Shenzhen JEJA Electronics Co., Ltd.

Instruction:

1. Battery installation--Light:
Unscrew the 2 halves of the light base, insert 3 X AAA batteries according to the polarity shown , Screw the 2 halves tightly back together to create the waterproof seal.

     Battery installation--Remote Control:
Remove the battery compartment at the reverse base of the remote. Insert 2* AG10 (LR113) batteries(included) into the compartment according to the polarity shown . Replace compartment.

2. Operation:

After installing the batteries, test the light by turning off and on via the remote control. Place the light into your chosen water setting. Use the remote control to choose color, brightness and rotation mode:
  Press the arrows to decrease or increase the brightness of the light.
  Press one of the color buttons for solid color

  Press fade and the light rotation will seamlessly blend from color to color.
  Press jump and the tones will rotate by jumping from color to color.
  Press reset to return the light to its default brightness and color mode.

3. Note: if the light has been placed into a dark or very thick container, the IR transmission may be obstructed. In this case please turn on the light and select your setting before placing it into the container or ensure the controller is directed into the container opening when operating the light.

4. Important Information:
Direct the controller towards the light face for the best IR reception.
To prevent corrosion, dry the light and remove the batteries after each use.

Usage:

Set the stage for an ambient evening at your next soiree  - place the remote controlled light into a vase, pond or water feature to enhance your space with soft decorative hues. 
Put into lanterns, swimming pools, bath tubs.
Put under or into hookah/ shisha. Under a bottle of wine as a glorifier.