Click on the image to view the original image
MPPT Solar charge controller with LED driver and microwave sensor and GPRS&LORA Remote Monitoring for Integrated solar LED street lights
JWL-JL Series Technical Specification
1. Introduction
JWL-JL series intelligent controller is the first one solar light controller combined with solar charge controller and LORA module all in one, and also through GPRS concentrator to remote monitored by PC or Cellphone APP.This controller isintegrated with led driver and infrared sensor, with time and dimming function. Users not only can program battery types, charging voltage, time and dimming value via a remote control JSD-RC to all JWL-JL series controllers, but also can program the above parameters from PC software and APP. It is also with self-dimming function to automatically control solar LED lights turning on/off 365 days.
*Integrated Zigbee device, constant current led driver, infrared sensors all in one, easy installation, lower self-consumption and high efficiency
*Zigbee device is to remote control all solar street lights: control led lights’ working, collect solar panel, solar battery and led lights working data, broken alarming and examining, ect and transmit data one controller to others
*Build-in constant current LED driver, with 91%-96% output efficiency
*With infrared sensor, by one remote control to program parameters to all controllers
*With Antenna that must install outside box
*Electric protection: over-load, reverse connecting, short-circuit and battery charging and discharging protection, ect
*Self-dimming function based on battery capacity to ensure 365 nights turned on.
*Waterproof IP67, suitable for high or low temperature environment
*LED indicators display to show all solar street light’s working status
*Suitable for all kinds of battery: gel/AGM/li-ion/Lifepo4 battery or users defined
3. Protection:
*PV reverse polarity protection
*Battery reverse polarity protection
*Battery over charge protection
*Battery over discharge protection
*Load short circuit protection
*Load overload protection
4. Lighting control option:
Light on + time + dimming, then time+dimming+motion sensor
A. 1st period: 0-720 minutes and 0-2700mA current
B. Morning mode: 0-720 minutes and 0-720mA current
√ The default battery type is sealed lead acid, Gel or flooded.
√ Users can change the battery type, charging voltage and other parameters as need.
Part 2. JWL-SWC GPRS Concentrator For Remote Communication
1.Introduction
JWL-SWC series concentrator is utilized of HUAWEI 4G communication module, compatible with
3G, 2G(GPRS signal), can be application in the world’s harshest conditions; whether the area is in
good 4G signal, or the remote area is in only GPRS signal.Besides ,it adopts zigbee/Lora
technology to local network communication,make it have lower self-consumption but being with
good communication.In addition,the zigbee is globalized standard, so it can be applied for all
countries without limit.
2.Features
1. Three communication methods are option: ZigBee, LORA, ZigBee & LORA communication.
2. Need SIM card, the card can be full netcom.
3. Wide rang input voltage, 12V and 24V are available.
4. Long communication radius between terminal modules, up to 2km and high speed.
5. Low self-consumption and low working power.
6. With memory function, can store terminal module information.
7. Keep communicating with terminal modules in real-time, once there is problem, it will alarms on the PC interface.
8. The wireless communication network is multi-level network topology, automatic networking, is reliable transmitting and accurate information.
5. Technical Parameters:
| Input Voltage | 9-30V(9-48V Customized) |
| Standby Current | 65mA/12V,33mA/24V |
| Emitting Data Current | 120mA/12V,62mA/24V |
| GSM Mode | 2G(GPRS/CDMA),3G(WCDMA/HUUPA/HSPA+/CDMA 2000 1x EVDO),4G(FDD-LTE/TDD-LTE) |
| Wireless Network | GSM/GPRS/EDGE:850/900/1800/1900MHz |
| CDMA:800/1900MHz | |
| WCDMA/HSUPA/HSPA+:850/900/1900/2100MHz | |
| CDMA200 1x/ EVDO Rev.A:800/1900MHz | |
| TD-SCDMA:1880-1920/2010-2025MHz(A/F) | |
| FDD-LTE:Band 1/3/5 | |
| TDD-LTE:Band 38/39/40/41 | |
| SIM Card Slot | Standard Drawer Layout Interface(like cellphone SIM card slot) |
| Communication Protocol | TCP/UDP Protocol |
| Emitting Power | GSM900-2W,DCS1800-1W |
| Receiving sensitivity | -100dBm |
| Antenna interface | Standard SMA female antenna interface,characteristic Resistance 50Ω |
| Line Transmit Distance | 1.5KM |
| Work Temperature | -40℃ to +85℃ |
| Dimension | 185×155×30mm (Not Including Antenna) |
| Weight | 1.2Kg (Not Including Antenna) |
6. PC Remote Monitoring Software:
This PC software is being with good human to machine interface,make it is easy to operate.It can
realize the all smart street light monitor function you want,such as overall data query,light remote
turn on/off,lighting parameter query and set,broken alarm and historical record query,lamp install
location query and user administration function.
Q1: Are you factory or trading company?
A: We are a factory, we provide OEM services. Some famous foreign supermarkets and we often collaborate.
Q2: Does the lamp light on automatically?
A: Yes, it will light on automatically at darkness no matter which mode except "OFF".
Q3: Can I can a sample order for solar street light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q4: What about the lead time?
A: 3 workdays for sample, 5-10 workdays for batch order.
Q5: Do you offer guarantee for the products?
A: Yes, we offer 3-5 years warranty to our products.
1.Our solar street light USES car battery, the life of street lamp ismore than 10 years
2.When it is rainy, the lamp can be used for more than 10 days.
3.Using microwave to sense distance greater than 12 meters isbetter than infrared effect
4.The product can be controlled by mobile phone app, which ismore convenient to use
