● Beam angle: 25° (15° optional) ● Flicker free (refresh rate >4K Hz) ● Dot matrix in 6 segments ● Built-in auto run programme ● Built-in color macro: fade in & out, jumping ● Power In/Out: Powercon, daisy chain ● Product length: 1000mm
Application: Ideal for stage, concert touring, disco club, KTV
Product Name
LED Bar Wash Stage Light 18x15W RGBWAUV 6in1 Length 1000mm 6-Segment Dot Matrix
LIGHT SOURCE
LEDs
18pcs 15W, RGBWA+UV 6-in-1
Color temp
white LEDs: 6800K-7200K
CRI
Ra>70
Luminance
Max. 6,786 lm
Drive mode
constant current
Drive current
650mA
OPTICS
Beam angle
25° (15° optional)
Light ouput (full right)
@15°: 1524Lux@4mtr; 410Lux@8mtr
Optic lens
acrylic, effective diameter 40mm
DIMMER & STROBE
Electronic dimming
0-100% linear, 16bit smooth dimming
Refresh rate
>4K Hz (Flicker free) , suitable for TV applications and all video recorded events
Electronic strobe
1-25 flashes/sec.
Built-in strobe macro
Built-in strobe macro and speed adjustable
EFFECTS
Dot matrix
in 6 segments, 3 LEDs per segment, individual colors control of each segments
Color change
Built-in color changing macro, speed adjustable
Built-in color macro
color fade in & out, color jumping, speed adjustable
Built-in Demo macro
Yes
CONTROL MODE
Control protocol
DMX512
Control mode
DMX, Master/Slave, Autorun, Sound-activate
DMX channels
10/22/36CH
DMX data In/Out
both XLR 3Pin and XLR 5Pin
DISPLAY & MENU SETTING
Display
4-digit LED
Setting and addressing
via 4-menu-button
Menu language
English
PAN-TILT
Tilt
±90º (support bracket)
BODY & HOUSING
Housing
streching aluminium
Housing surface
baking finished treatment
Housing color
black (white optional)
POWER SUPPLY
Power supply
AC100V-240V; 50/60Hz
Power consumption
Max. 160W
Power Supply Unit (PSU)
200W, PFC>0.95
Power In/Out
Powercon, daisy chain
Power linking
up to 4units@120V; 8units@230V
COOLING
Heatsinks
Entire casing as heat sink for LED source
Cooling
forced convection, 2 silent fans
THERMAL MANAGEMENT
Thermal management
Over temperature protection
Cooling fans intelligent speed regulation
Auto reduce light output in case of overheating
Thermal management system ensures long life of LEDs
SAFETY PROTECTION
Electrical protection
Electronic protection against short circuit
Rigging protection
with one eye bolt at the rear
RIGGING & MOUNTING
Rigging
single mounting yoke
Mounting
Mounting bracket: 2pcs/pair
ENVIRONMENT AND PHYSICAL
IP rating
IP20
Environment temperature
-20°C-40°C
Dimensions(mm)
L1000 x W70 x H195 (head horizontal)
Dimensions(inch)
L39.37 x W2.76 x H7.68 (head horizontal)
Net weight
7.5kg (16.54lb)
ACCESSORIES
Power input cable
1.5mm2, PVC sheath, length 1.4mtr
DMX cable
not included (optional)
Safety cable
not included (optional)
Mounting bracket
included (2pcs/pair)
Product Effects
Related Products
Packaging & Delivery
PACKAGING
Two kinds of packaging are available. Default: master carton; Optional: flight case as per customers' request.
Master Carton
Product Q'ty: 2 Units
Net Weight: 14.4 Kg
Gross Weight: 16.4 Kg
Sizes (cm): L112 x W38 x H26
Flight Case
Product Q'ty: 6 Units
Net Weight: 43.2 Kg
Gross Weight: 73.0 Kg
Sizes (cm): L116 x W38 x H66
SHIPPING METHODS
We are able to provide you the most efficient transport and related services to meet the delivery needs. The following shipping methods are available and optional to meet your different requirements.
Shipping methods
Service
Mainly suitable for
Remark
Express
Door-to-Door
sample or small orders
DHL, FedEx, UPS, TNT, EMS ect.
Airfreight
Port-to-Port
medium or large orders
Door-to-Door service is also available
Sea-shipment
Port-to-Port
medium or large orders
Door-to-Door service is also available
Factory Tour
MODERN ASSEMBLY LINES
Total 6 assembly lines. Comprise 1 electronics assembly line, 5 product assembly lines. The assembly workshops and electronic workshops are outstanding both in scale and technology.
Assembly Workshop #1
Assembly Workshop #2
Assembly Workshop #3
Assembly Workshop #4
PRO & DIVERSE TEST EQUIPMENTS
Our laboratories are built strictly according to the demand of ISO/IEC1 standards, with the aim to strengthen the R&D base, provide true and reliable data for the prephase development appraisal, performance testing and quality evaluation of new products. In addition, provide continuous inspection for the approved products to ensure the product quality and improve customer satisfaction.
Optics Testing Lab
Constant Current Tester
Salt Fog Test Machine
Waterproof Test Machine
Constant Temp & Humi Test
Xenon Lamp Aging Test Machine
Cable and Electronic Tester
Lux Tester
Noise Testing Lab
ADVANCED PRODUCTION MACHINES
Equipped with advanced production and processing machines, including SMT, wave soldering machine, reflow soldering machine, automatic inserters, electronic printing presses, metal plate cutting machine and LED chips mounter etc.
Samsung LED Chips Mounter
Metal Plate Cutting Machine
SHOW ROOM & WAREHOUSE
One show room occupy approx. 200 sq.m. The show room is quarterly renewed in the view for enable every customers who visit our factory can see and know our newest developed products. One raw materials warehouse occupy about 500 sq.m. Two finished products warehouses that total occupy around 600 sq.m.
Show Room
Raw Materials Warehouse
Finished Products Warehouse
FAQ
Do you accept sample order?
Sure, sample orders are welcome.
What about your MOQ (Minimum Order Qty)?
1. For sample order, no MOQ limit.
2. For repeat orders, have MOQ limit. Different products/models have different MOQ. Please ask us in advance.
What about your lead time?
1. Sample order: 2-5 days if samples are in stock; 10-15 days if samples are out of stock.
2. Small order: 10-20 days
3. Medium order: 15-25 days
4. Large order: 25-45 days
What's your warranty?
2 years. Light source made of glass (such as halogen bulb, metal hilide lamp, xenon lamp etc.) not included in warranty.
Within the warranty period: Free repair parts fee, free shipping charge.
Out of the warranty period: Buyers need to bear the cost of repair parts and shipping cost.
How to deal with the faulty?
1. Please send us relevant faulty pictures or videos for our reference.
2. The more details that you can feedback, the better for us to make sure what problem(s) happened about the product.
3. After accurately determining the cause of the failure, we will send your the corresponding repair parts.
Do you accept OEM order?
Sure, OEM orders are welcome as well. However you should meet our OEM minimum order qty.
We can print Logo/Brand/Trademark on products and/or packages as per your requirements.
Click on the image to view the original image
