Click on the image to view the original image
Description | ||
Model Number | RX-TP10058-UV-DM | |
Demension | 1203×100×72mm | |
Input Voltage | AC100~305V | |
Power | 200W | |
PPFD | 1432µmol/m²/s @ 0.2m | |
Light Efficiency | 2.1µmol/J | |
Lifetime | 35,000hrs | |
Warranty | 2 years | |
RX-TP10058 Toplighting LED Module: Patent product from Koray. Unique Frosted Lens + Reflector Cup structure, which provides up to 100% higher PPFD and 50% more uniform lighting than non-lens type LED toplighting. Sealed waterproof IP64/65, which can be operated safely in high humidity environment. Due to its high energy efficiency, low temperature rise and long lifetime, the RX-TP10058 LED toplighting is the cost-effective way whether you want to increase yields, move to predictable year-round production, improve quality or shorten growth cycles.
2. Built-in MEANWELL LED power supply with long lifetime and high reliability.
3. Optional dimmable type for smarter control and UV-switched type for medical plants.
4. Custom-tailored spectrums for different kinds of plants with different grow stages.
5. Low temperature rise without fan-cooling design.
6. Waterproof IP64/65 for safe operation in high humidity environment.
7. Input Voltage: AC100~305V, Power: 200W, PF>0.9.
8. Meet the safety requirements around the world (CE, RoHS, FCC, etc.)
Model Number | RX-TP10058 -A (IP65) | RX-TP10058 -DM (IP64)* | RX-TP10058 -UV (IP64)* | RX-TP10058 -UV-DM (IP64) | ||||
Dimension | 1203×100×72mm | |||||||
Net Weight | 5.7kg | |||||||
Spectrum | V2 | V2+UV | ||||||
PPFD (µmol/m²/s) | 1173/0.2m 492/0.5m 226/1.0m | 1391/0.2m 530/0.5m 219/1.0m | 1452/0.2m 545/0.5m 235/1.0m | 1432/0.2m 545/0.5m 232/1.0m | ||||
Illuminance (Lx) | 75874/0.2m 31948/0.5m 14592/1.0m | 90108/0.2m 34474/0.5m 14170/1.0m | 92548/0.2m 34724/0.5m 14978/1.0m | 91485/0.2m 34650/0.5m 14752/1.0m | ||||
Efficiency | Lumen: 26479Lm PPF: 418umol/s PAR: 87953mW | Lumen: 26479Lm PPF: 418umol/s PAR: 87953mW | Lumen: 25808Lm PPF: 406umol/s PAR: 85004mW | Lumen: 25636Lm PPF: 404umol/s PAR: 84660mW | ||||
Power Input | 200W (at 230V) PF>0.9 | |||||||
Comment | Efficiency: 2.1umol/J CRI: Ra88 For vegetative growth mainly | Rotary dimmer control CRI: Ra90 For vegetative growth mainly | UV-switched control CRI: Ra90 For vegetative growth mainly | Rotary dimmer + UV-switch CRI: Ra90 For vegetative growth mainly | ||||
Surface Temperature Rise: Tc28K, Operating Temperature: -30°C~40°C, Lifetime: 35,000hrs (Ta≤25°C). Tolerance Range for Optical and Electrical Data: ±10%. Beam Angle: 60°. Recommended Irradiation Distance: 0.2m~2m. *The data of RX-TP10058T-DM was tested at 207W; The data of RX-TP10058T-UV was tested when UV was off. | ||||||||
Do plants need high Lumen/Lux?
Lumen/Lux is only for human eyes perceiving, not for plants growth. So if someone tell you to choose high Lumen/Lux grow lights, please tell them 'It's cool', then walk away XD. What's plants really need is enough PPFD.
What's the PPFD?
PPFD (Photosynthetic Photon Flux Density) is a measure of the number of photons in the 400-700nm range of the visible light spectrum (Photosynthetic Active Radiation or PAR) that fall on a square meter of target area per second.
Full Spectrum=Simulated Sunlight?
Not all wavelengths are good for plants. In general, red+blue is enough for plants growth. Adding little green with be pleasant for human eyes, but High CRI ≠ High Efficiency. Red (660nm) should be strengthen when green added.
What's LCP?
LCP (Light Compensation Point) is the lowest photosynthesis demands of PPFD. Plants start to grow only when PPFD exceeds LCP.
What's LSP?
When PPFD reaches a certain intensity, the photosynthetic rate will no longer be increased. That called LSP (Light Saturation Point).
Q1. Can I have a sample order for LED lights?
- Yes, we welcome sample order for your testing.
Q2. What about the lead time?
- 2~20 Days (sample needs 3-5 days).
Q3. Is there any MOQ limit for orders?
- Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
- We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive.
Airline and sea shipping also optional.
Q5. How to proceed an order for LED lights?
- 1. let us know your requirements or application;
2. we quote according to your requirements or our suggestions;
3. customer confirms the samples and places deposit for formal order;
4. we arrange the production.
Q6. May I print my logo on the products?
- Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7. How to send the payment?
- Bank transfer, Western Union, PayPal, Credit Card, Cash, etc.