Click on the image to view the original image
Water Tank Liquid Level Meter with Thinner Probe Measuring Water Deepness
Product Description
ALM well water level meter sensor provided the most accurate method of measuring the water level,
typically used for measuring wells, drilling and pipe’s water level. The instrument can be used in during
construction, can also be used as a long-term safety monitoring of the project.
typically used for measuring wells, drilling and pipe’s water level. The instrument can be used in during
construction, can also be used as a long-term safety monitoring of the project.
The instrument consists of a sensor probe, a host, and a reel.
Features
2.When the probe head touches the water, an induced potential is generated.
3.After circuit processing, sound and light instructions are issued.
4.Then read out the height difference data between the surface and the ground from the ruler
1.Slowly slide the sensor probe head down into the water.
2.When the probe head touches the water, an induced potential is generated.
3.After circuit processing, sound and light instructions are issued.
4.Then read out the height difference data between the surface and the ground from the ruler
5. Quick response circuit design, high detect speed, high sensitivity
6. Adapt to various environmental and regional water quality
7. Low power consumption, battery-powered use two years at once
8. The cable has a ruler scale to measure the water level directly
6. Adapt to various environmental and regional water quality
7. Low power consumption, battery-powered use two years at once
8. The cable has a ruler scale to measure the water level directly
Detailed Images
Size Information
Manufacture Specification
Ambient Temperature: 25°C (unless specified)
Item | Parameters |
Model | ALM-30 , ALM-50 , ALM-100,ALM-150,ALM-200 |
Water level | Maximum cable range (depending on model), scale reading, resolution 1mm |
Temperature | Measuring range 0-80 ° C, digital display, error 0.5 ° C, resolution 0.1 ° C |
Conductivity | Measuring range 0-30000μm/cm, digital display, error 1%, resolution 1μm/cm |
Temperature compensation | Automatic linear compensation based on 25 °C |
working environment | Ambient temperature -20~65°C, relative humidity ≤90%, no condensed water, no strong magnetic field interference |
shell material | ABS reel and handle, metal frame |
Wire reel specification | Color: red, material: ABS, diameter: 310mm |
Cable specification | Copper core enameled wire is made of special PE compound, width: 12mm * thickness 2mm |
Power supply | DC 9V battery |
Signal display | Indicator light, buzzer, digital tube digital display |
Probe specifications | Graphite electrode, 316 stainless steel sheath, diameter 18mm * length 180mm |
Packing | Length 36cm * width 26cm * height 44cm |
Wide Applications
Best Selling
Company Introduction
Acme is a High-Tech Enterprise integrating R&D, production and sales. The company have gathered a number of excellent domestic technical experts in various fields such as automation, electronics, machinery and computer. More than 80% of ACME employees have bachelor's degree. At present, ACME has more than 120,000 customers worldwide and it's products are exported to 109 countries in Europe, America, Australia, Africa, SouthEast and Asia. In the latest petrochemical industry, our newest products have the advantages of small size, temperature changes resistance, high stability and reliability. ACME has a number of national patents. The purification workshop covers 5000 square meters with one automatic production line and two semi-automatic production lines and 1000 ㎡ modern office. The annual production capacity is one million sensors. Our products have passed the ATEX, TUV CE, RoHS and FCC certification of the European Union and North American, The factory have been passed ISO9001:2015 international quality management system certification. Our mature and advanced production processes and technologies can guarantee the safe, stable and long-life time operation on your project.
Our Services & Strength
1.The measuring medium must be compatible with 304 stainless steel and nitrile rubber.
2.If possible, the electrical connection of the pressure transmitter should be as vertical as possible. Measurement of dry gas pressure except indoors and in dry conditions;
3.When the pressure vessel being measured has a water or Air Hammer, a buffer valve must be installed at the front of the pressure transmitter interface.
4.When used to measure the pressure of the outlet of a pressure pump, a buffer valve or a buffer bend must be added at the front end of the pressure transmitter.
5.When a pressure transmitter is installed in the pipeline, the first step is to clean up the liquid at the threaded port and install the pressure transmitter. The second step is to slowly open the valve after installation to prevent pressure impact.
6.When a pressure transmitter is mounted on a turn pipe, it should be at least 9 times the diameter of the pipe at the turn and preferably downstream of the turn flow.
7.When a motor is present in the measuring system, ensure that the motor housing and the housing of the power supply for the pressure transmitter are at the same potential and that the resistance between the housing and the Earth does not exceed 9;
8.When there is a transducer in the measuring system, the shell of the motor controlled by the transducer should be connected to the ground wire of the power supply of the pressure transmitter.
9.When the pressure hole of the pressure transmitter is blocked, it is forbidden to use the sharp device to dredge the pressure hole.
10.The pressure transmitter should be dismounted and the part of the pressure hole should be immersed into the liquid that can dissolve the blocked material. If the user needs to calibrate zero or calibration full range should be under the guidance of our technical people, do not open the transmitter to adjust;
11.The pressure transmitter should be installed in a position that is not vulnerable to collision and trampling;
12.Transmission Cables for pressure transmitters shall not be placed in the same threading tube or in the same wiring groove as other high-voltage or high-voltage cables;
13.When installing pressure transmitters in the Dorey area, be sure to install lightning protection devices and ensure that the pressure transmitters and power supply are reliably connected to the ear;
FAQ
Q:Can you accept ODM & OEM service ?
A:We professional provide OEM &ODM service for all of items.
Q:Could I get samples?
A:Yes,we have materials in stock to help you to get the samples as soon as we can.
Q:How about the quality of the magnets?
A:We have the certification of ISO,CE and ROSH,we could send the certification test of our company to you.
Q:How is the price?
A:As we believe the quality is the most important,we will provide the best quality ultrasonic level sensor we can with reasonable
price.
Q:Could you provide me the shortest lead time?
A:We have materials in our stock,if you really need,you can tell us and we will try our best to satisfy you.
Q: How can I get my sensors?/ What's the means of transport?
A. We main delivery goods by express: DHL, FedEx, UPS,TNT, etc or logistics by indicator
Q. How to order ?
A. In order to recommend you the most suitable radar level sensors and make an accurate quotation, please provide the following information and send it to our sales when you are going to make an inquiry, thanks !
1. What is your medium? Water, oil or others?
2. Level range: 0-10meters, or others?
3. Output signal: 4-20mA, RS485 or others?
A:We professional provide OEM &ODM service for all of items.
Q:Could I get samples?
A:Yes,we have materials in stock to help you to get the samples as soon as we can.
Q:How about the quality of the magnets?
A:We have the certification of ISO,CE and ROSH,we could send the certification test of our company to you.
Q:How is the price?
A:As we believe the quality is the most important,we will provide the best quality ultrasonic level sensor we can with reasonable
price.
Q:Could you provide me the shortest lead time?
A:We have materials in our stock,if you really need,you can tell us and we will try our best to satisfy you.
Q: How can I get my sensors?/ What's the means of transport?
A. We main delivery goods by express: DHL, FedEx, UPS,TNT, etc or logistics by indicator
Q. How to order ?
A. In order to recommend you the most suitable radar level sensors and make an accurate quotation, please provide the following information and send it to our sales when you are going to make an inquiry, thanks !
1. What is your medium? Water, oil or others?
2. Level range: 0-10meters, or others?
3. Output signal: 4-20mA, RS485 or others?