Evaporative Condenser is best suited for a project. The information contained within this section is geared towards the use of evaporative condensers in the HVAC and light industrial markets only. There are two types of evaporative condensers: combined flow and counterflow.
Material: PVC(polyvinyl chloride) Water temperature: -35~70℃ Application: cross-flow cooling tower Sheet thickness: 0.25-0.45mm Sheet width: 1330mm Sheet length: customized Color: black and gray
Marley cooling tower fill
Cooling tower fill material is a hanging film type cooling tower fill which spreads the water into a thin film, flowing over large vertical surfaces, promoting maximum exposure to air flow. This fill provides much more water surface exposure per cubic foot than splash type fill.
Material: Thermal Formed PVC Water temperature: 35~70℃ Tensile Strength: 6,300 psi(at room temperature) Tensile Modulus: 325,000 psi Specific Gravity: 1.50 Maximum Continuous Hot Water Temperature: 52℃ PVC Sheet Thickness: 0.25mm,0.40mm Sheet Spacing: 19mm
LC Cooling tower fill
It has the advantages of direct replacement, performance enhancement, and water condition compatibility. Allow various heat loads, flow rates, water quality, and horse power combinations selections.
Normal Size of Liangchi cooling tower fill:750*1600mm,750*800mm,750*400mm.
KK cooling tower fill
Kuken cooling tower fill is made from PVC injection molding under high pressure,it has special structure form, not only certain stiffness, but some flexibility. Due to good elasticity, the filler would chatter under the water-drop impact effect lead to some water drop rebound to above for water redistribution.
Fill material : PVC / PP Fill color:Black / blue Fill Height: 200/250/300mm length: any Fill sheet thickness :0.35mm-0.6mm Working temperature :-30℃-120℃
Normal Size: 500mmX1000mm
SP Cooling Tower Fill
Material：Thermal Formed PV Application: Cross Flow cooling tower Sheet thickness: 0.25-0.45mm Sheet spacing:16mm,18mm Sheet width: 850mm,1000mm Sheet length: 1000mm,or Customized Color: black or gray
Oblique cooling tower fills
Oblique cooling tower fills also called cross-fluted film fill media manufactured from rigid PVC sheets conforming to CTI STD-136 for cooling tower heat-transfer applications. The media is fabricated from corrugated PVC sheets that are solvent-welded for maximum strength and resistant to UV, rot, fungus, organic and inorganic solvents, acids, alkalis, and chemicals normally found in cooling tower waters.
S wave filler is one of the most important components for exchange of gas and water in cooling tower. It is the major parts to improve the efficiency of cooling tower and make sure the economy and safe operation.
With the development of the plastic industry, counter-current tower drench water plastic packing "S" shape ladder wave, obliquely wave, which has the heat dissipation ,good performance ,Ventilated small resistance, durable, based on the easy and other advantages, it is widely used in different types of large, medium, small, cooling tower.
Cross Fluted cooling tower media/Cooling tower infill/Manufacture directly sale the same charactor of crossflow fills
Our related products
Hebei Lanyu Rubber and Plastic products company supply you cooling tower fills, which is belong to couterflow cooling tower fills,. and use it for square water cooling tower very much more.We also can provide you related products such as MBBR media ,Bio ball infill media, Biochemical ball filter, Elastic fill, Combined fill also we can supply all kind of cooling tower fill nozzles . If any of our products meet your demand ,please contact us in time .
Contact Us
Cross Fluted cooling tower media/Cooling tower infill/Manufacture directly sale the same charactor of crossflow fills
Click on the image to view the original image
