Click on the image to view the original image
hot dipped galvanized pressed sectional panel 20000 liters storage galvanized water tank
Our hot galvanized is assembled by moulding single panels, sealing material, metallic parts and pipeline. Water tanks could be custom-made with capacity from 0.125m3 to 5000m3 according to your needs. Generally the height should be no more than 4 meters, the length and width can be limitless.
Potable Water Storage (drinking water)
Rainwater Harvesting & Storage
Emergency Water Storage
Pump Chambers
Effluent/Acid and alkali solution treatment & Storage
Hospital,buildings,building site, school and other place
Potable Water Storage (drinking water)
Rainwater Harvesting & Storage
Emergency Water Storage
Pump Chambers
Effluent/Acid and alkali solution treatment & Storage
Hospital,buildings,building site, school and other place
1. Support for Panels: Longtime FRP Co. supply The panels whichare supported externally or internally by an adequate support system. External Reinforcement - Hot Dipped Galvanized Steel Internal Reinforcement - Hot Dipped Galvanized or Stainless Steel 304 rod support and tie-rod
2. Sealing Materials: Non toxic Rubber foam to be used for all jointing, it is especially developed with long experience and technology on SMC products. It maintains soft itself and adhesives even at low temperatures
3. Bolts, nuts and washers for the assembly of panels: Exposed externally are hot dipped galvanized steel and in contact with water internally are hot dipped galvanized steel or stainless steel 304
4. Flange: the flanges for inlet, outlet, drainage, overflow are hot dipped galvanized steel or stainless steel 304
5. Ladders: SMC sectional tank of 1.5m depth or more shall be provided with internal ladder made up of materials same with the supports. The external ladders shall be galvanized mild steel or equivalent
6. Drainage: The dome shaped bottom panel with a concave drain panel facilitates complete and fast drainage.The concave drain panel has been designed to ensure the periodic cleaning and inspection of tank
7. Overflow Screens: it can be supplied with a screen overflow having a micro mesh filter
8. Man-hole opening & Inspection Hatches: the size can be customized; normally it is supplied with a standard size of:600 x 600mm. the opening can be designs of bolt, seal-tight locking arrangement
9. ABS roof vent with PE insect screen
10. Float level indicator, optional SS304 for internal and external support structure are available on request