Click on the image to view the original image
LED lamp 4 pin 2G7 11W dulux SE
Suitable for replacing 4 pin Dulux S CFL lamp in luminaire with ECG
From Original Design Manufacturer in Taiwan
(Model: ECGsmart 2G7 6W LED Lamp)
l Directly replace old 4 pin cap PL-S, Dulux SE or Biax SE 11W CFL
l Work with ECG ballast in existing luminaire.
l Work with off-the-shelf LED driver.
l Much safer with built-in fuse protection
l Safety with over current protection, over temperature protection,
l Extremely energy-saving
l Long service life of up to 50,000 hours
l New innovative design
l Good Heat Dissipation
l No hazardous substances and RoHS compliant.
l Note: not suitable for working with AC mains (85V~265V).
|
Ballast Compatible ECGsmart 2G7 6W LED DULUX F |
|
|
Descriptions |
Value |
|
Direct Replacement Target |
Old 2G7 11W DULUX S/E lamp |
|
Driver Compatibility |
Electronic ballast, LED driver |
|
Ballast Driving Voltage |
Upon ballast output |
|
CC LED Driver Output Voltage |
28V DC |
|
CC LED Driver Output Current |
160mA DC |
|
Wattage |
6W |
|
Conventional Wattage Equivalent |
11W DULUX S/E CFL |
|
Base Cap |
4 pin 2G7 |
|
Life Span (Hours) |
50000 hrs |
|
Beam Angle (Degrees) |
140 |
|
Lumens per Watt |
130 lm/W |
|
Lumens |
780 lm |
|
Cap material |
plastic |
|
PC cover material |
Clear / Milky |
|
Dimension |
189 mm(L)*34 mm(W) |
|
CRI |
> 82 |
|
CCT |
2700K ~ 6000K |
|
Product Model: ECGsmart 2G7 6W LED lamp |
|
|
Order number |
Direct Retrofit Target |
|
ES-2G7-6W27K-AL |
conventional 4 pin 2G7 11W 2700K DULUX S/E CFL |
|
ES-2G7-6W30K-AL |
conventional 4 pin 2G7 11W 3000K DULUX S/E CFL |
|
ES-2G7-6W40K-AL |
conventional 4 pin 2G7 11W 4000K DULUX S/E CFL |
|
ES-2G7-6W50K-AL |
conventional 4 pin 2G7 11W 5000K DULUX S/E CFL |
|
ES-2G7-6W60K-AL |
conventional 4 pin 2G7 11W 6000K DULUX S/E CFL |
It’s time to take advantage of latest ballast compatible technology. Our electronic ballast compatible design in LED lamp can help directly retrofit old 4 pin PLS CFL with ease. No rewiring for fixture. No bypassing to ballast. We have developed complete LED solutions towards old 4 pin PLS CFL. Among them, our ECGsmart 2G7 6W LED lamp can instantly substitute old 4 pin PL-S, Dulux SE or Biax SE 11W CFL. The LED CFL lamps are available in various correlated color temperature (CCT). Furthermore, the ECGsmart can also work with LED driver or dimmable LED driver. With this amazing capability, the fixture always can be reused because the old ballast can be replaced with off-the-shelf LED driver.
ECGsmart 2G7 series LED bulbs can operate on both electronic gear and external LED driver. With built-in fuse protection, over current protection, over temperature protection, electric arc as well as spark prevention, the safety of ballast compatible LED CFL can be guaranteed.
ECGsmart 2G7 series LED bulbs are not applicable to AC mains voltage (85V~265V) or magnetic ballast (CCG). In case you need 2G7LED solutions for connection with direct mains voltage, please check out our AC-in 2G7 LED series. If you have any questions or you are interested in other products, more than welcome to contact with our lighting specialist. We will to know more about our electronic ballast compatible LED solutions.
Reminding for usage:
l Be installed or replaced only by a qualified electrician and lighting technician.
l Switch off all power to fixture before executing any inspection, installation, maintenance, or removal.
l Remember to connect fixture or its LED driver/ballast to ground.
l Operate in fixtures that provide the free flow of air around the lamp. In enclosed fixtures, ensure the lamp has enough space for heat dissipation. This will ensure lumen maintenance and extend its service life.
Benson Energy Saving Technology ( BEST) is an original design manufacturer located in Taiwan. We design the innovative T5, T8, G24 and 2G11 LED retrofit products just like fluorescent ones. In other words, our retrofit products have exact the same parameters as FL, just with better LED light engine and without LED driver inside.
In response to global climate change and the unstoppable trend of low-carbon economy, the BEST has seriously taken social responsibility of environmental protection as our mission. We promote ” Lumiaire Reuse Initiative” to avoid emerging E-WASTE disaster and try to give “old luminaire a new life.” The concept can be said as “ Reuse the lumininaire. Save the planet. Light the future.”
The BEST owns unique patents for LED retrofit products which can directly replace traditional ones, especially in low pressure discharge lamps. Our approach is simple and easy to help people reuse existing usable light fittings and keep on the track of circular economy.
The product strategy is based on the core technology of electronic ballast (ECG) compatibility to develop two major series of LED lamps: ECGsmart series and ECGall series. ECGsmart series , including T5,T8,G24,2G11 LED lamps, not only work with ECG, but also function with external dimmable LED driver so as to meet the needs of future smart lighting. The transition between ECG and LED driver is seamless and painless as well as follow the trend of circular economy. ECGall series, also covering T5,T8,G24,2G11 LED lamps, have multi-functional compatibilities. Except the ECG compatible, ECGall can function with CCG( T8 only), direct AC main power or external non-dimmable LED driver to meet users’ different application needs.
Company Culture
Our Belief:
To be ”Impartial and Righteous” company. To produce “Innovative and Excellent” product. To inspire “Diligent and Enthusiastic” employee. To have “Caring an Commitment” to Society.
Our Vision:
Preserve and protect the nature of earth to create more eco-friendly environment for our next generation.
Our Mission:
To be a leader in global lighting industry by continual innovations
Our Strategy:
Innovate quality, energy-saving and eco-friendly products to exceed customer’s expectations and contribute to social responsibility.
Our quality policy:
To create excellent quality and provide the most competitive products
To meet customers’ needs and ensure their satisfactory
To involve everyone and implement continual improvement
BSET ECGsmart G24q retrofit LED bulb
Suitable for replacing G24q CFL lamp in luminaire with ECG