Click on the image to view the original image
T300K LED Controller
T-300k System features
A. 32—256 grade Gray level,Support software Gamma correction.
B. Support the rules and special-shaped handle.
C. 8 ports output,one port can support 512-1024 lamp pixels.
D. Online (also can SD Card) control, offline control Can be multiple controllers used in combination,
the contents of the line control program stored in the SD card.
E. Compatible with single line or double line chips.
F. If the controller to the lamps distance can choose photoelectric isolated transmission and as far as
several distances of up to 200-300 M
Support chip:
WS2801, WS2803
WS2811, WS2812B, INK1003
TM1803, TM1804, TM1809, TM1812
LPD8806,LPD8809,
UCS1903, UCS1903B, UCS1909
LPD6803, D705
UCS1912
UCS2903, UCS2909, UCS2912
UCS6909, UCS6912, UCS7009
UCS5903
TLS3001
P9813
For DMX512, 170*8 / 512*8 Pixel
If the controller to the lamps distance can choose photoelectric isolated transmission and as far as several distances of up to 200-300 Meters
Note: the T-300 K controller offline control, each machine controller must put a SD card.
2012 Edition T-300K controller can only be combined with the new version software LedEdit 2012 . Using the old software does not support the new version of the controller; the new version of the controller has been print the Chinese sign
Note: If the distance between controller and lamps more than 50meters, we suggest using differential signal transmission control or Photoelectric isolated signal transmission control,please read the manual carefully. Signal lines must be a cable,the best is Super five kinds of cable.
Application scope
LED digital tube, LED point light sourcethe exterior light and a module pixel screen (dazzle colour screens) high power DMX lighting.
Specific parameters
Memory card
Type: SD card, if controlling so many lamps it is best to use the high-speed SD card
Capacity: 256MB
Format: FAT
Store file: *.led
Physical parameters
Working temperature: -30~85 Celsius
Weight: 1.35KG
Working voltage: AC 85~265V
Working power: 8W
Size: L270mm*W180mm*H55mm
Signal port: 3pin connect port
Differential signal transmission control
1.Purpose
For many big engineering, the distance between lamps and controller more than 50m and less than 200m.
2 Details
built-in Signal transmitter above signal transmission Repeaters,signal transmission receiver
Attention
The distance, between controller and transmission Repeaters between transmission Repeaters and transmission Repeaters between transmission Repeaters and signal transmission receiver can not be more than 50 meters,The maximum distance between controller and signal transmission receiver is 200 meters
Wiring Diagram
1.The data port of the controller must be connect with the signal output of led lighting
If the led lighting is dmx led lighting , the B output connect with the data port of controller
2.The clock port of the controller must be connector with the clock port of lighting
If the led lighting is dmx led lighting , the A output connect with the clock port of controller
3.The controller is connected by via the built-in switch
4.The IP address of the computer should be set to: 192.168.60.178
5.The GND of controller must be connector with the GND of led lighting
Note:
T-300K Support online download the effect-file to SD card. Before copy files to SD card,The SD card must be formatted as FAT format. The SD card in controller can not be hot-swappable, plug the SD card every time, you must first disconnect the power supply.
