Click on the image to view the original image
COB strip light COB soft light bar COB flexible strip light flip chip COB strip light
 |
Specification | Light bar parameters |
| Brand | Huangtai | |
| Type | HT-SX512F008W24-12-COB | |
| LED QTY | 512 LED/m | |
| Chip manufacturers |
Sanan/Epistar/Customized |
|
| CRI | Ra85 | |
| Input voltage | 12v/24v | |
| Power | 12w/m | |
| Luminous officiency | 220-240lm/m | |
| Luminous brightness | 1300k-1600k | |
| Board width | 8mm | |
| Color temperature | 2800k/3000k/4000k/6000k | |
| Cuttable length | 63mm/31.5mm | |
| Working lifetime | 50000h | |
| Working temperature | -20℃-40℃ | |
| Warranty | 3 years |
Advantages of the new soft light bar
1.Widely used, easy to install and maintain, long service life
2.Very flexible, easy to bend into different shapes, various white light options
3.COB Design, with more chips on PCB, more even light.
4.Up to 512 chips on 1 meter PCB, only 2.0mm space between chips.
5.Cuttable at every 63mm length. Form a circuit without affecting other circuites.
6.Efficiency up to 100Lm/W.
7.Ra 90 also available.
8. Can be customized according to customer requirements
Installation Ways
* The max running length is 6 meters, for over 6 meters please connect in parallel.
* Make sure of the total watts of COB Strip lights is less than 80% of the power supply's
max output.
* Match the polarities according to the mark ('+' and '-') in the PCB while connecting.
Installation precautions
1. In the installation process, sharp objects should be avoided from touching the surface of the lamp strip, so as not to damage the colloid and cause undesirable effects;
2. Avoid contact of colloid in luminous area with high-temperature objects to avoid scalding colloid and affecting linear effect;
3. Select DC24V stabilized voltage power supply to drive, and select a power supply with appropriate power according to the number of lamp strips to be installed; The total power of each power-driven lamp belt shall be less than 80% of the rated power of the power supply;
4. It is strictly prohibited to bend or twist the lamp strip in a short distance to avoid damaging the rubber strip or damaging the internal electrical structure of the chip, as shown in the figure 4:
5. Pay attention to waterproof and moistureproof.
6. it is suggested that any bending diameter of the lamp band should be > 1CM, as shown in the figure 5:
Application
1. Residential lighting,
2. Hotels, KTV and other places of entertainment decorative lighting.
3. Furniture decoration lighting
4. Display cabinet, jewelry cabinet counter lighting
5. Lighting of concealed parts of corridor stairs
Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than
Q3. Do you have certifates about the led strip light ?
A: Yes, we have got the Rohs ,Gs certifates for all products.
Q4. Do you accept custom service ?
A: Yes, we accept custom order.
Q5.Are you a factory ?
A: Yes, we are a factory in Shenzhen. China.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 3 years warranty to our products.