Click on the image to view the original image
LC8808b GS8208 WS2815 Addressable Bendable RGB LED Strip 12V individual
Max length 5M, Welcome any evaluation!
1) WS2815 8208 LC8808 12V smart RGB addressable pixel led Strip is powered by a 12V power supply and is controlled by a single data line from a suitable controller.
2) 3-pin JST connector included: Red:VCC, Yellow:GND, Green:DATA.
3) The strip has 3M adhesive tape on the back. Installation surface must be smooth, clean and dry.
4) Strip can be cut between every LED to create custom lengths.
5) Do not bend strip sharply.
6) Longer runs should be powered from both ends to reduce voltage drop.
7) 30leds/m, 60leds/m available, one roll max Length can be 10M.
Detail use information:
4 PIN wire stands for
Red : + 12V
Green : DAT
Yellow : DAT
Black : GND
Connection:
1) Signal wire: DC+, DAT, GND
2) DC+ and GND connect to power supplier; DAT and GND connect to controller
3) Relative Controller: SPI controller support WS2812B/WS2811 ; when use DMX decorder, can connect to DMX system
1.Widely used for home decoration use, hotels, clubs, shopping malls.
2.Architectural decorative lighting, boutique atmosphere lighting.
3.Extensively applied in Backlighting, concealed lighting, channel letter lighting.
4.Emergency & security lighting, advertisement sign lighting.
5.Decorative lights for holiday, event, show exhibition.
6.Applicable for automobile and bicycle decoration, border or contour lighting.
1) Controller: SD controller T-1000S, T-4000, T-8000, K-1000, K-8000D, online controller, T-200K, T-300K, T-500K, YM-ST4K, YM-ST8K, YM-LM501, Arduino, Artnet, DMX controller.
As it is SPI signal, when control by DMX will need a decoder.
2) Software to make program, now we using most is LEDEDIT, and LED EASY, MADRIX. Can contact us for more information.