Click on the image to view the original image
9Inch 12Inch 225Mm 150Mm F6t5 Lamp 6Inch F4t5 Fluorescent 12V 300Mm Led T5 Tube Light
It is used to replace existing Fluoro tubes in Motorhomes,Caravans, Cruise ship, RV, people don’t want to replace the whole unit as the screw holes never line up properly and the original ones have covers.
Take off the old T5 T8 fluorescent tube, then install this led tube light on the bracket fitting.
Its a replacement tube only, it has polarity sensitive as there are a number of ways the original fittings are wired up, some are positive one end and negative the other and also vice versa, some are negative and positive at one end and no wires at the other,
we take it one step further, to have the driver built inside the tube so the tube can run on 12-24VDC in whatever housing it is put into.
MUST be directly wired to the 12-30V DC Power: Disconnect Ballast & Starter when installation.
Ideal for RV and Marine Lighting: To replace 12-30V DC F8T5 CFLs with Instant-On Warm White Cool White 3000K 4000K 6000K!
GREEN ECO FRIENDLY + SIGNIFICANT ENERGY SAVING + LONG LIFETIME: no flickering, no UV light, no buzzing ballast, no hazardous materials + Saving ~50% electricity + Lifetime>50,000hrs & 3-Year Warranty
This is a double-end input T5 12" LED tube light with 4W total input power to replace 8W energy-saving fluorescent F8T5. It is not dimmable and works from 12-30V DC.
It"s a 12-30V DC LED tube light, NEVER use it with AC 110/120VAC source unless you have an AC-DC converter to achieve 12-30V DC power. Please check your fixture voltage.
It must be directly wired to your 12-30V DC power from the two input ends on both sides without the use of any electronic ballast or starter.
T5 Series, Patented DC12V-24V, G5 base, SMD2835 LED, No need ballast
| Model No. | Tube Size | Input Voltage (V) | Wattage (W) | Luminous Flux (LM) | Replace Light |
| LE-DCT5-150 | 150*Φ16MM | 12V, 24V, 36V, 48V, 125V | 3W | 360LM | Replaces: 6" F4T5 fluorescent tubes |
| LE-DCT5-225 | 225*Φ16MM | 12V, 24V, 36V, 48V, 125V | 4.5W | 540LM | Replaces: 9" F6T5 fluorescent tubes |
| LE-DCT5-300 | 300*Φ16MM | 12V, 24V, 36V, 48V, 125V | 5W | 600LM | Replaces: 12" F8T5 fluorescent tubes |
| LE-DCT5-531 | 531*Φ16MM | 12V, 24V, 36V, 48V, 125V | 7W | 840LM | Replaces: 21" F13T5 fluorescent tubes |
Besides,
we have 36V DC LED Tube Light,
and 12V DC 24V DC 451mm T8 LED Tube light to replace Replaces: 18" F15T8 fluorescent tubes, please contact me for more details.
T8 Series, Patented DC12V-24V 36V 48V 125V, G13 base, SMD2835 LED, No need ballast
| Model No. | Tube Size | Input Voltage (V) | Wattage (W) | Luminous Flux (LM) | Replace Light |
| LE-DCT8-451 | 451*Φ26MM | 12V, 24V, 36V, 48V, 125V | 9W | 1080LM | Replaces: 18" F15T8 fluorescent tubes |
| LE-DCT8-600 | 600*Φ16MM | 12V, 24V, 36V, 48V, 125V | 9W | 1080LM | Replaces: 2ft fluorescent tubes |
| LE-DCT8-900 | 900*Φ16MM | 12V, 24V, 36V, 48V, 125V | 14W | 1680LM | Replaces: 3ft fluorescent tubes |
| LE-DCT8-1200 | 1200*Φ16MM | 12V, 24V, 36V, 48V, 125V | 18W | 2160LM | Replaces: 4ft fluorescent tubes |
Application:
Marine, solar systems, battery, ATM machine of Bank, other machines, motorhomes, caravans, boats, steamship, power shortage areas etc. and other places where working in DC low voltage)
Installations:
These LED bulbs have our built-in constant-current driver already installed,
but they do not require the high-voltage ballast that is in your current fluorescent fixture. These are not for 120VAC home use.Only DC10-30V input voltge allowed.