Click on the image to view the original image
HOT selling 65mm 50mm Diameter Dual Color RGB IC LED Light Address 12V Multi Color LED Halo Ring
Product Description
- The control circuit and RGB chip are integrated in a 5050 components, to form an external control pixel.
- Intelligent Reverse-connection protection.
- Using the built-in signal reshaping circuit to achieve the signal waveform shaping, and no distortion of waveform of signal takes place.
- The gray levels of each pixel are of 256 levels, which achieves “256*256*256=16777216” full-color display, and
the refresh frequency reaches to 2KHz. - Serial cascade interface, data receiving and decoding depend on just one signal line.
- Dual-signal wires version, signal break-point continuous transmission.
- Any two point the distance more than 5M transmission signal without any increase circuit.
- When the refresh rate is 30fps, cascade numbers is at least 1024 pixels.
- Data transmitting at speeds of up to 800Kbps.
- Good color consistency reliability, high cost-effective.
Parameter :
| Product name | RGB IC LED board |
| Working Voltage | 5V DC |
| Power | 0.25W |
| IC type | WS2811 |
| LED size | 6 pins 5050 LED |
| Chip size | Red 9mil, Green 9x13mil , Blue 9x13mil |
| Board size | diameter: 65mm , inner diameter: 53mm |
| PCB material | FR-4 |
Accessories needed
Sequence Chart
Data Transmission Method
Composition of 24bit Data
Typical Application Circuit
1. Recommended application circuit
Remarks: R1 is the IC’s protective resistance, power spike and reverse connection of the battery power terminal, will be
protected, its range of 150R~390R. C1 is external filter capacitor, its value of 100NF.
2. For complicated wiring & space-saving
Application:
Guardrail tube series, point light display series, flexible/rigid strips series, module series applications.
Lighting stage costumes, innovative gadgets or any other electronic products.