Click on the image to view the original image
2020 top brand SOCMA 40 TON FORKLIFT HNF-400 on sale
1, adopt , Weichai turbocharging engine, powerful, energy conservation, environmental protection, satisfies the requirement of high efficiency operation.
2, use Hangchi, Sanchi planet type hydraulic power shift transmission, big traction in combined operating condition, the transmission system more reliable.
3, adopt double turbine hydraulic torque converter, stepless speed change, single lever control for the speed changing, easier for operation.
4, Variable speed control valve matched with neutral starter, the machine start more secure.
5, front axle adopt heavy duty type driving axle, enlarge size of axle housing, hub and bearing, spiral bevel gear and wheel planetary wheel deceleration increasing twist, steel structure bridge shell support, increase the load capacity and service life.
6, No spokes plate type rim, increase the bearing capacity of hub.
7, rear axle by transverse hydraulic cylinder type steering, steering axle has compact structure, transmission angle is 70.5 °, help to reduce the resistance and reduce tire wear and improve the driving comfort.
8, using four heavy caliper disc brake, thicken brake disc, the rear air tank, 18 times braking pressure strength ratio, heat dissipation faster, reliable and safe operation
9, hydraulic load sensing steering system, rear steering axle with small turning radius, flexible and light steering
10, adopt double pump confluence working hydraulic system, greatly reduce fuel consumption, energy consumption. Hydraulic system equipped with oil radiator and back pressure protection device, ensure the machine heat balance
| Technical Parameter | |||
| Item | Decs. | Unit | Model |
| HNF-400 | |||
| Features | Rated Load | Q(t) | 40 |
| Load center | c(mm) | 1200 | |
| Wheelbase | y(mm) | 5000 | |
| Weight | Weight | kg | 53000 |
| Chassis | Tyre Specs.:Front | 18.00-25-40PR | |
| Tyre Specs.:Rear | 18.00-25-40PR | ||
| Tyres Qty,front/rear(X-drive wheels) | 4\2 | ||
| Wheel tread:Front | b10(mm) | 3030 | |
| Wheel tread:Rear | b11(mm) | 2786 | |
| Dimension | Mast/carriage tilt angle(front/rear) | Degree(°) | 5\10 |
| Mast height(fork lowering) | h1(mm) | 4625 | |
| Mast lifting height | h3(mm) | 4000 | |
| Max.lifting height | h4(mm) | 6560 | |
| Height to head guard(height to cab) | h6(mm) | 3900 | |
| Overall height(with forks) | l1(mm) | 9900 | |
| Fork front vertical surface to the rear end of the vehicle | l2(mm) | 8000 | |
| Overall width | b1/b2(mm) | 4160 | |
| Fork dimension | s/e(mm) | 2400X300X135 | |
| Fork carriage width |
b3(mm) | 3400 | |
| Mast min ground clearance(with load) | m1(mm) | 300 | |
| Wheelbase center min ground clearance(with load) | m2(mm) | 460 | |
| Min.Turning radius | Wa(mm) | 8000 | |
| Travel speed(with load/without load) | km/h | 22/25 | |
| Performance | Max.lifting speed(with load/without load) | mm/s | 200/250 |
| Max.Lowering speed(with load/without load) | mm/s | 300 | |
| Traction | N | 250000 | |
| Gradeablity(with load/without load) | % | 25 | |
| Driving brake | Oil-cooled multiple wet disc |
||
| Engine | Engine brand/model | Optional one | Weichai engine |
| WP12G340(250kW National III) | |||
| Optional two | Xi'an | ||
| QSM11 250kW | |||
| Cylinder No. | 6 | ||
| Others | Transmission |
Torque convertor |
|
| Attachments working pressure | bar | ||
| Attachments using oil amount | l/min | ||
