Click on the image to view the original image
MAIN CHARACTERISTICS
1, Single-table/single-tube
2, Rotary anode X-ray tube unit and tangential annular tube head
3, Single-phase full wave rectification high-voltage generator
4, Power voltage(v) radiograph kilovolt (KV).step-less control electric mechanism
5, Filament stabilizer for X-ray tube unit and space charge compel mentor
6, Radiograph volume KV ,mA and S. grading and interlock protection
7, Adopt digital circuit timer. Grading according to R10 priority coefficient,(for more accurately controlling time)
8, HT primary, the zero controlled circuit of silicon-controlled rectifier of heavy power
9, Radiographic table can move in length an breadth
10,The radiographic table. Column and vibrating grid are in a whole without ceiling and floorh rails bottom
ITEM | CONTENTS | INDEX |
Demand of power suppl | Capacity | Two-phase 30KVA |
Voltage,Frequency | 380V/220V ±10%50HZ ±0.5Hz | |
Intemal resistance | 2Ω(380V) 0.6 Ω(220V) | |
power supply | Adjustable range | 380±10% at220V being adjustable continuously |
Radiograph | Voltage | 50-90KV |
50-90KV being adjustable continuously | ||
current | Small focus:50mA100mA,Big focus:50mA 100mA 200mA 300mA | |
time | 0.04~6.35s 23grades together grading a according to R10 coefficient | |
High-voltage generator | Capacity | 20KVA(instantaneous) |
Max DC output voltage | 125KV | |
Max DC output current | 300mA | |
X-Ray tube | Model | XD51.20-40/125 |
Focus | Small focus 1×1mm big focus2×2mm | |
Radiographic table
| Length×width×height of bed surface | 2000mm×665mm×700mm |
Moving range of bed surface | 640mm in Length,200mmin breadth | |
Ray-filter of table | Travel in length ≥500mm | |
Grid density N=28 | ||
Convergence distance f.=100cm | ||
Grid ratio r=8 | ||
Column of X-ray tube unit | Moving Longitudinally along Radiographic table | 1000mm or 1800mm |
Distance to friend as moving up and down (along column) | 650~1800mm | |
Rotary around the center of cross arm | ±180° | |
Rotary around the shaft line of X-ray annular tubes | -10°~60°~ +120° | |
Max size of cassette | 356mm×432mm (14″×17″) | |
| | |
| Delivery bed | LED ceiling lamp | Medical pendant |
| | |
| Medical trolley | Hospital bed | Operation table |
1.If you are building a new hospital, we can offer your solutions of OR and ICU room;
2.Our sales team give you the quotation and answer your any questions and doubts about products;
3.You are welcome to visit our factory at any time;
4.we will offer you the solutions of quality problems within 24hours;
5.our after-sales service:
Warranty: 1-2years due to different products, and lifetime maintaining.
A. Engineer goes to your hospital and Provide on site customer training and guide,
B.We send the free parts to you by courier and give you technical guidance via online video,
C.We support you free training of products.
HEFEI MT MEDICAL CO.,LTD. is located at economic development zone,Hefei city,Anhui province,China. From 1998,we are working to research and develop Operation table,Operation lamp,Ceiling pendant,Hospital bed,patient monitor,medical stretcher,medical trolley,x-ray film viewer,medical cabinet, and other medical furnitures.
In 1998, Our R&D team developed electric operation table and hospital bed,medical cabinet,and so on;
In 2011,we developed first LED operation lamp and thenceforward, we develop other different of LED operation lamp,examination light one after another;
In 2012,patient monitor is sold on line;
In 2013,we develop first carbon fibre operation table,it is newest material for medical industry;
Previously, our products were sold to the middle east,Southeast Asia,the Commonwealth of the Independent States,Africa,South America and some European markets.
In 2016;we start to export our medical equipment to international markets by ourselves.
The products were approved by CE,ISO13485.
We build a sales team with 10 employee and a after-sales service team with 5 employee.
Our after-sales team will resolve your problems in time within 24hours.
M-strive to technical innovation , T-guard life.
Learn to be a decent person before learning how to do things, In Good Faith Cooperation,Sincerely make friends,To create a win-win situation. This is the cornerstone of our eternal achievement.
MT MEDICAL do our best products and service for you.
Q: Are you manufacturer ?
A: Yes,we have our own R&D team and sales team,We provide you one-stop service.
Q: Do you have CE,ISO13485?
A: Yes,our products are approved by CE,ISO13485
Q: Is OEM &ODM available in your factory ?
A: Yes, you just offer us necessary documents and then we will produce the products as your requirements.
Q: What is your Payment term?
A: 1.L/C at sight;
2.T/T:30% deposit by T/T,70%balance by T/T before shipment
3.Trade term:EXW, FOBShanghai or CIF&CFR
Q: What is your Packing details?
A: 1.Wooden case or carton package,standard export packages
2.All of the productions are inspected carfully by QC before delivery.
Q: What is your Delivery time?
A: Usually, we make merchandise inventory, if we have the products in stock,The delivery time is5-10 days after receiving the deposit;
If we don’t have the products in stock, we will arrange the production right now, the delivery time will be 20-30days,It depends on the quantity of order
Q: What is your Min.order?
A: There"s no minimum quantity